Siemens ANT793-6DG Compact Operating Instructions page 44

Mounting
①
Screw for the horizontal alignment
②
Screw for the vertical alignment
Procedure
Note
Fix the position of the rotating bracket with the setting screws loosened.
1. Position the antenna as required.
2. First tighten the screw for the vertical axis. The tightening torque is 3.5 Nm.
3. Then tighten the screw for the horizontal axis. The tightening torque is 3.5 Nm.
44
ANT793-6DG
A5E03484067-01, 09/2011