Download Print this page

Panel Address Settings Page; Select The Device Address Remotely - Bosch B426 Setup & Troubleshooting

Conettix ethernet communication module
Hide thumbs

Advertisement

Panel Address Settings Page

When the IP Communicator address switch is set as 1 – 9 the Device Address used by the control panel is displayed.
Figure 8 Panel Address Settings

Select the Device Address Remotely

When set to '0' the below screen displays allowing the device address to be set with the Web Interface. This could
provide for a remote selection of the IP Communicator's device address when needed. See table 1 Panel Address
Selection for details.
F
igure 9 Panel Address Page
13

Advertisement

loading

This manual is also suitable for:

B420