before using your Kenwood
Only use the appliance for its
intended domestic use. Kenwood
Read these instructions carefully and
will not accept any liability if the
retain for future reference.
appliance is subject to improper use,
Remove all packaging and any
or failure to comply with these
before plugging in
Make sure your electricity supply is
The blades are sharp, handle with
the same as the one shown on the
care. Hold the knife blade at
underside of the appliance.
the top away from the cutting
This appliance conforms to EC
edge, both when handling and
directive 2004/108/EC on
Electromagnetic Compatibility and
Switch off and unplug:
EC regulation no. 1935/2004 of
before fitting or removing parts
27/10/2004 on materials intended
for contact with food.
before using for the first time
Never remove the power unit until
Wash the parts: see 'cleaning'.
the blade(s) have completely
Remove the knife blade before
emptying the bowl.
Never use a damaged appliance.
Get it checked or repaired: see
'service and customer care'.
upper knife blade
Never let the power unit, cord or
lower knife blade
plug get wet.
Don't let excess cord hang over the
edge of a table or worktop or touch
to use your food
Never leave the appliance on
Misuse of your food chopper can
The knife blade unit comes in 2
result in injury.
parts, a lower and an upper blade.
Never use an unauthorised
For coarser chopping use the lower
blade on its own.
This appliance is not intended for
For finer chopping or pureeing use
use by persons (including children)
both blades together. This will also
with reduced physical, sensory or
give a faster result. To use both
mental capabilities, or lack of
blades fit the upper blade onto the
experience and knowledge, unless
lower blade and turn anti-clockwise
they have been given supervision or
to locate in place
instruction concerning use of the
the blades are sharp.
appliance by a person responsible
Note: After processing food, the
for their safety.
upper blade may disengage from the
Children should be supervised to
lower blade. This is normal as the
ensure that they do not play with the
blade assembly is designed to be
loose fitting to ease separation after
. Take care as