Modbus ASCII operation and for different baudrates, allowing both types of networks to be integrated with Modbus TCP through one Modbus gateway. Package Checklist Before installing the MGate MB3660 series gateway, verify that the package contains the following items: • 1 MGate MB3660-8 or MB3660-16 gateway •...
Hardware Introduction As shown in the following figures, the MGate MB3660-8 has 8 DB9/RJ45 ports for transmitting serial data, and the MGate MB3660-16 has 16 DB9/RJ45 ports for transmitting serial data. The MGate MB3660I series gateways provide 2 kV serial port isolation protection. AC-DB9 Models DC-DB9 Models - 3 -...
AC-DB9-I Models AC-RJ45 Models Reset Button— Press the Reset button continuously for 5 sec to load factory defaults The reset button is used to load factory defaults. Hold the reset button down for five seconds using a pointed object such as a straightened paper clip.
Page 5
STEP 4: Connect the power supply to the unit. Wall or Cabinet Mounting Two metal plates are provided for mounting the unit on a wall or inside a cabinet. Attach the plates to the unit’s rear panel with screws. With the plates attached, use screws to mount the unit on a wall.
Specifications Power Input Dual 20 to 60 VDC (for DC models); or dual 100 to 240 VAC, 47 to 63 Hz (for AC models) Power Consumption MGate MB3660-8-2AC 144 mA/110 V, 101 mA/220 V MGate MB3660-8-2DC 312 mA/24 V, 156 mA/48 V MGate MB3660-16-2AC 178 mA/110 V,120 mA/220 V MGate MB3660-16-2DC...
Need help?
Do you have a question about the MGate MB3660 Series and is the answer not in the manual?
Questions and answers