Table of Contents
Advertisement
Quick Links
Mobile
Mediaboard
48"w
(Model COCMBW)
If you have a problem, question, or request, call
your local dealer, or Coalesse at 1.800.627.6770
Or visit our website: www.coalesse.com
©
2012 Coalesse
San Francisco, California U.S.A.
Printed in U.S.A.
Mobile
Mediaboard
Mediascape
48"w
(Model COC1MBWMS) - digital mediascape
Note
: - Intended for Institutional use.
Marking:
Model COCMBW is intended to be used with UL listed sub-assembly TV mount 228905.
Model COC1MBWMS is intended to be used with UL listed sub-assembly mediascape
Pan 23226201 and UL listed sub-assembly TV mount 228905.
™
Exponents
Mobile Whiteboard
1/2" socket
3/8" socket
Page 1 of 5
939500682 Rev E
Advertisement
Table of Contents
Summary of Contents for Coalesse Exponents COCMBW
- Page 1 : - Intended for Institutional use. Marking: If you have a problem, question, or request, call your local dealer, or Coalesse at 1.800.627.6770 Model COCMBW is intended to be used with UL listed sub-assembly TV mount 228905. Or visit our website: www.coalesse.com Model COC1MBWMS is intended to be used with UL listed sub-assembly mediascape ©...
- Page 2 SAVE THESE INSTRUCTIONS This appliance is intended for commercial use only. Connect this appliance to a properly grounded outlet only. See Grounding Instructions. IMPORTANT SAFETY INSTRUCTIONS Operating Instructions When using an electrical furnishing, basic precautions should always be followed, Please refer to the attached Installation Instructions. including the following: Read all instructions before using the media:scape.
- Page 3 SAVE THESE WARNING ATTENTION ADVERTENCIA INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS If not moved properly, S'il n'est pas correcte- Si no se la mueve This appliance is intended for commercial correctamente, la unidad unit can tip over and ment manipulé, When using an electrical furnishing, basic precautions use only.
- Page 4 Lift up to disengage Mobile hooks. Use suction Mediaboard Back cups to aid in removal surface 48”w Remove back surface Install monitor bracket using (4) - 1/4 - 20 bolts and (4) - 1/4 - 20 nuts and (8) washers. Determine hole position, 1 or 2 for needed height.
- Page 5 Plug in the power, monitor connection Finish step 3 using (2) - 1/4 - 20 and audio from the monitor into bolts and (2) - 1/4 - 20 nuts and (4) media:scape controller washers through the lower slots in Mobile the mounting bracket and through the media:scape pan.
Need help?
Do you have a question about the Exponents COCMBW and is the answer not in the manual?
Questions and answers