Advertisement
7. Mark drill points on the wall in the center of
the two slots on the upper rear of the box.
8. Drill the two holes and screw in the top
screws using
1
" or
/4
(user supplied). Leave a small gap between
the wall and each top screw.
P/N 315-093304-5
3
" mounting hardware
/8
9. Mount the enclosure on the two screws and
then install the bottom screws.
10. Tighten all screws securely against the back
wall of the enclosure.
11. Slip the door back on the hinges of the
enclosure.
Advertisement
