Basic Operations; Monitor Panel/Touch Panel - JVC KW-AVX710 Instructions Manual

Basic operations —
Display <AV Menu> screen.
Display <Source Menu> screen.
• Activate/deactivate TA
Standby Reception.
• Display <PTy Search> menu.
[Hold]
☞ page 12
• Turn on the power.
• Turn off the power. [Hold]
• Attenuate the sound (if the power is on).
Reset the unit.
• Use only when the internal system malfunctions.
• In the explanation, buttons on the touch panel
are indicated inside [
• For details on the touch panel operations, see
each source operation section.

Monitor panel/touch panel

☞ page 50
☞ page 9
Display and erase the Short Cut windows.
Available functions vary among the sources. For details, see each source operation
section.
Change the display information.
☞ page 9
Change the sources.
].
Adjust the volume.
• Display <Open/Tilt> menu.
• Eject the disc and display <Open/Tilt>
menu. [Hold]
• Close the monitor panel when <Open/Tilt>
menu is displayed.
<Open/Tilt> menu
• [OPEN]: Open the monitor panel.
• [EJECT]: Eject the disc.
• [CLOSE]: Close the monitor panel.
• [TILT +/–]: Tilt the monitor panel.
• [Exit]: Erase this screen.
• Shaded icons cannot be used.
5
Remote sensor
INTRODUCTION