Using Other External Components - JVC KW-AVX710 Instructions Manual

Using other external components

AV-INPUT
You can connect an external component to the LINE IN/VIDEO IN terminals.
Assigned title (☞ page 49)
: Buttons on the touch panel. In the explanation, they are indicated inside [
These buttons also work when they are not shown on the touch panel (while watching the playback picture).
~
Press [SOURCE], then press [AV-IN].
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Turn on the connected component and start playing the source.
To display the operation buttons (☞ page 20) while watching the playback picture
Touch the screen (center portion).
• If no operations are done for about five seconds, the operation buttons disappear.
• [KEY] does not work when the source is "AV-IN."
Sound mode (☞ page 48)
You can easily access to <Aspect> setting
menu by pressing [SHORT CUT] on the
touch panel, then...
☞
( page 9)
45
☞
].
Touch the screen (center portion).
Continued on the next page
EXTERNAL DEVICES
page 48