Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Vult Manuals
  4. Music Pedal
  5. Vorg
  6. Build manual

Vult Vorg Build Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
VORG
build guide

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vorg and is the answer not in the manual?

Questions and answers

Related Manuals for Vult Vorg

Summary of Contents for Vult Vorg

  • Page 1 VORG build guide...
  • Page 2 VORG BUILD GUIDE Thank you very much for acquiring the Vorg DIY kit. This guide will walk you through the whole assembly process. Before you start we recommend you to read the guide, specially the Notes that some of the steps have.
  • Page 3 VORG BUILD GUIDE Disclaimer Remember that by purchasing a DIY kit you are responsible if your build fails. We cannot provide repair services for failed builds. The main reason is that, depending on the extent of the damage, the total cost you’ll end up paying would be higher than buying the assembled module in the first place.
  • Page 4 VORG BUILD GUIDE How to use this guide This guide contains one page for each different component you are gonna place. The components are organized starting from the lower values. For example, 1kΩ resistors are placed before the 2kΩ resistors.
  • Page 5 VORG BUILD GUIDE We hope you enjoy building your own Vorg and if you like it share your results in social media. Leonardo, Radost and Andrey...
  • Page 6 VORG BUILD GUIDE ASSEMBLING THE MAIN BOARD...
  • Page 7 VORG BUILD GUIDE Component: Resistor Value: 220Ω Quantity: 4 Designators: R15, R14, R17, R16...
  • Page 8 VORG BUILD GUIDE Component: Resistor Value: 1kΩ Quantity: 3 Designators: R11, R26, R27...
  • Page 9 VORG BUILD GUIDE Component: Resistor Value: 1.8kΩ Quantity: 2 Designators: R19, R4...
  • Page 10 VORG BUILD GUIDE Component: Resistor Value: 4.7kΩ Quantity: 1 Designators:...
  • Page 11 VORG BUILD GUIDE Component: Resistor Value: 10kΩ Quantity: 12 Designators: R9, R12, R10, R18, R13, R7, R8, R20, R22, R23, R24, R25,...
  • Page 12 VORG BUILD GUIDE Component: Resistor Value: 22kΩ Quantity: 1 Designators:...
  • Page 13 VORG BUILD GUIDE Component: Resistor Value: 100kΩ Quantity: 3 Designators: R1, R3, R5...
  • Page 14 VORG BUILD GUIDE Component: Resistor Value: 470kΩ Quantity: 1 Designators:...
  • Page 15 VORG BUILD GUIDE Component: Capacitor Value: 1nF Quantity: 2 Designators: C4, C5...
  • Page 16 VORG BUILD GUIDE Component: Capacitor Value: 4.7nF Quantity: 1 Designators:...
  • Page 17 VORG BUILD GUIDE Component: Capacitor Value: 100nF Quantity: 8 Designators: C7, C8, C9, C10, C12, C13, C14,...
  • Page 18 VORG BUILD GUIDE Component: LED Value: - Quantity: 2 Designators: LED1, LED2 Notes: The LEDs must be placed reversely. The actual placement does not matter as long as the marks are on the opposite side. Look for the mark at the bottom of the LED.
  • Page 19 VORG BUILD GUIDE Component: Transistor pair Value: BCM857 Quantity: 1 Designators: Notes: Look for the mark in one of the corners of the package. Make sure it matches the orientation. The mark is tiny, you have to use a magnifying glass.
  • Page 20 VORG BUILD GUIDE Component: Ferrite Value: - Quantity: 2 Designators: F1, F2...
  • Page 21 VORG BUILD GUIDE Component: Regulator Value: TLV7605 Quantity:1 Designators:...
  • Page 22 VORG BUILD GUIDE Component: IC Value: TL074 Quantity:1 Designators: Notes: Double check the orientation. Look for the mark in the IC package ERROR...
  • Page 23 VORG BUILD GUIDE Component: IC Value: LM13700 Quantity:1 Designators: Notes: Double check the orientation. Look for the mark in the IC package ERROR...
  • Page 24 VORG BUILD GUIDE Component: IC Value: TL072 Quantity:1 Designators: Notes: Double check the orientation. Look for the mark in the IC package ERROR...
  • Page 25 VORG BUILD GUIDE Component: IC Value: ATTINY85 Quantity:1 Designators: Notes: Double check the orientation. Look for the mark in the IC package ERROR...
  • Page 26 VORG BUILD GUIDE Component: IC Value: DG403 Quantity:1 Designators: Notes: Double check the orientation. Look for the mark in the IC package ERROR...
  • Page 27 VORG BUILD GUIDE Component: Capacitor (Polarized) Value: 10uF Quantity: 2 Designators: C2, C3 Notes: These capacitors are polarized, make sure they point to the direction marked in the silkscreen.
  • Page 28 VORG BUILD GUIDE Component: Capacitor (Polarized) Value: 47uF Quantity: 2 Designators: C6, C11 Notes: These capacitors are polarized, make sure they point to the direction marked in the silkscreen.
  • Page 29 VORG BUILD GUIDE Component: Power connector Value: - Quantity: 1 Designators: Notes: The connector has a slot, make sure it matches the picture shown below. Red stripe of cable this side +12V -12V...
  • Page 30 VORG BUILD GUIDE This is a good moment to check your board. Use a magnifying glass or a microscope to check that all the IC terminals are soldered and there are no bridges between the pins. Use a multimeter to measure the resistance between +12V and ground and also from ground to -12V.
  • Page 31 VORG BUILD GUIDE ASSEMBLING THE FRONT SIDE...
  • Page 32 VORG BUILD GUIDE To assemble the front side, we recommend you to first place all components then the panel. Once you have everything in place, solder the components.
  • Page 33 VORG BUILD GUIDE Component: Jacks Value: - Quantity: 4 Notes: Make sure the jacks are correctly placed before soldering.
  • Page 34 VORG BUILD GUIDE Component: Potentiometers Value: B100kΩ Quantity: 4 Notes: Make sure the potentiometers have crossed completely through the holes and are aligned. Before soldering, check that the potentiometers can be turned without friction with the panel in place.
  • Page 35 VORG BUILD GUIDE Component: Potentiometers Value: B50kΩ Quantity: 1 Notes: Make sure the potentiometers have crossed completely through the holes and are aligned.
  • Page 36 VORG BUILD GUIDE Component: Push Button + Cap Value: - Quantity: 1 Notes: Place the switch cap before the putting the panel for the last time.
  • Page 37 VORG BUILD GUIDE Component: Red LEDS Value: - Quantity: 2 Notes: The LEDs have a polarity. Make sure the flat side of the LED points to the correct direction. Before soldering, make the LEDs go through the panel. ERROR...
  • Page 38 VORG BUILD GUIDE Final Steps One more time, check that you don’t have any bridges between the component pins. Look carefully. All ICs are critical. Make sure that you don’t connect the cable backwards. Connecting it backwards will break the module. Check that the red stripe of your cable has -12 volts with a multimeter.