know your Kenwood deep fryer
Never plug in the fryer before filling the bowl with oil.
Keep children away during use and after - fat stays hot for a long time.
Never let the flex touch hot surfaces or hang down over the worktop
edge - a child could grab it and pull the fryer down. Wind excess flex
around the bracket at the back of the fryer.
Never touch the bowl, pour away oil or move your fryer while the oil's
Never put the electrics unit in water. Remove it before washing the rest
of your fryer.
After cleaning, ensure the bowl and its electrics pins are dry before
Never leave your fryer on unattended.
This fryer is not intended for use by young children or infirm persons
Young children should be supervised to ensure that they do not play
with the appliance.
Take care when removing the electrics unit - the temperature probes
may be hot.
Do not use if there is any damage to the fryer, flex or plug. Get it
checked or repaired: see 'service', page 4.
Only use the electrics unit supplied.
Watch out for steam during cooking and when you open the lid.
Never put your fryer near or on cooker hot plates.
This fryer is for domestic use only.
Always unplug the fryer after use.
before plugging in
Make sure your electricity supply is the same as the one shown on the
underside of the electrics unit.
important - UK only
The wires in the flex are coloured as follows:
Green & Yellow = Earth, Blue = Neutral, Brown = Live.
This machine complies with European Economic Community Directive
before using for the first time
Remove all packaging.
Dismantle: see 'to assemble, use and dismantle your fryer', page 3.
Wash the parts: see 'cleaning', page 4.
know your Kenwood fryer
bracket for excess flex
bowl electric pins