TiVo DVR Upgrade Instructions
  1. Manuals
  2. Brands
  3. TiVo Manuals
  4. DVR
  5. DVR
  6. Upgrade instructions
TiVo DVR Upgrade Instructions

TiVo DVR Upgrade Instructions

Tivo dvr user manual
Hide thumbs Also See for DVR:
1
2
3
4
5
6
Table of Contents

Advertisement

Quick Links

Download this manual
TIVO DVR UPGRADE INSTRUCTIONS (#49)
(c) 2001-2005, weaKnees. All rights reserved.
Instructions for TwinBreeze® Gen2 / DIRECTV R10 and similar architectures
Instructions are available online (in COLOR) at http://www.weaknees.com
A FEW WORDS OF CAUTION:
Upgrading a TiVo DVR presents a few physical hazards. As with most consumer electronics devices, components in the TiVo may still
carry a lethal charge, even after disconnecting from your power supply. Be aware of this while working inside your TiVo. Allow
sufficient time for discharging of components and avoid contact as much as possible with potential hazards. While we have done
everything we can to provide accurate, easy-to-follow instructions, we cannot be responsible for any damage done to your TiVo or to
yourself as a result of your upgrade. By opening your TiVo, you agree that neither weaKnees nor any of its members or affiliates is
responsible in any way for any harm done. Please be VERY careful when upgrading. NEVER open the TiVo while the unit is plugged in
and NEVER operate the TiVo if the lid is not securely fastened. PLEASE NOTE: Opening the TiVo voids the warranty.
IF YOU NEED TECHNICAL SUPPORT:
If you have purchased an upgrade kit that included one or two pre-configured hard drives: We are more than happy to answer any
questions that you might have regarding your installation. We answer email very frequently, and can often be reached that way at night or even
on weekends. We encourage you to try email first, but you are also free to call us any time if you have questions about your installation or these
instructions.
If you have purchased a TwinBreeze Bracket package (without a pre-configured drive): These kits are designed for people who already
know how to prepare a drive (or drives) for use in a TiVo. We unfortunately do not have the resources to teach our bracket customers how to
upgrade their TiVos.
Required Tool (not included): Phillips-head screwdriver.
Kit includes all items shown below.
Figure 1
Not shown:
(1) Set of printed instructions
(1) Upgrade hard drive(s) (if applicable)

1. OVERVIEW

Upgrading your TiVo entails just five basic steps:
(a) Open the TiVo (Section 2)
(b) Remove the factory drive (Sections 3 through 5)
(c) Install drives on the mounting bracket (Sections 6 through 9)
(d) Install bracket and cables (Sections 10 and 11)
(e) Close the TiVo (Section 12)
1 of 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DVR and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TiVo DVR

Summary of Contents for TiVo DVR

  • Page 1 If you have purchased a TwinBreeze Bracket package (without a pre-configured drive): These kits are designed for people who already know how to prepare a drive (or drives) for use in a TiVo. We unfortunately do not have the resources to teach our bracket customers how to upgrade their TiVos.
  • Page 2 Using the Torx T-10 (smaller of the two) L-key included with your kit, unscrew the five Torx screws on the back of your TiVo. The five screws are surrounded by gray from the top of the TiVo’s case. See Figure 2.
  • Page 3 UPGRADE KIT. If your TiVo’s original drive is a Quantum or Maxtor hard drive: If your drive has one jumper, then you will see a total of four pairs of pins (and, therefore, 4 possible vertical places for the jumper). Ignore the single pin located closest to the IDE cable connector.
  • Page 4 Figure 14. Drape the remainder of the cable over the front of the unit. Move the TiVo's internal red/yellow/black power connector over the back side of the TiVo, as shown in Figure 14. You might have to flex or bend the power cable a bit to get it to stay in place.
  • Page 5 To insert the cable, start with the pins closer to the front of the TiVo, then rock the cable into the IDE port on the A drive. By rocking the cable in this way, you will be able to install the cable without hitting the side of the fan.
  • Page 6 “channel down” button). This message gives you the maximum capacity of your unit, after the upgrade.. We thank you very much for your purchase and hope that you enjoy your newly-enhanced TiVo. Please email us with any comments, suggestions or complaints.

Table of Contents