Pioneer HTP-076 Instruction Manual page 54

Checking the input format and listening mode
Pressing button on the remote controller or STATUS button on the main unit
repeatedly will switch the display of the main unit in the following order.
• When using a BLUETOOTH connection, press the STATUS button on the
main unit.
• Not all the information is necessarily displayed.
Input source and volume
Listening mode
Input format
The display is switched in
a few seconds.
Sampling frequency
Input signal resolution
Contents Connections
≫
54
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫ ≫