Electrolux EOF7P00LX User Manual page 33

Table of Contents

Advertisement

Problem
It takes too long to cook
the dishes or they cook too
quickly.
Steam and condensation
settle on the food and in
the cavity of the oven.
The display shows "C3".
The display shows "F102". • You did not fully close
The display shows an error
code that is not in this ta‐
ble.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
13.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
We recommend that you write the data here:
Model (MOD.)
Possible cause
The temperature is too low
or too high.
You left the dish in the
oven for too long.
The cleaning function does
not operate. You did not
fully close the door, or the
door lock is defective.
the door.
• The door lock is defec‐
tive.
There is an electrical fault.
The demo mode is activa‐
ted.
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
ENGLISH
Remedy
Adjust the temperature if
necessary. Follow the ad‐
vice in the user manual.
Do not leave the dishes in
the oven for longer than 15
- 20 minutes after the
cooking process ends.
Fully close the door.
• Fully close the door.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows
"F102" again, contact
the Customer Care De‐
partment.
• Deactivate the oven
with the house fuse or
the safety switch in the
fuse box and activate it
again.
• If the display shows the
error code again, con‐
tact the Customer Care
Department.
Refer to "Using the set‐
tings menu" in "Additional
functions" chapter.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eof7p00rx

Table of Contents