Page 2
The following instructions are offered to help eliminate delay and error in processing purchase orders for the equipment in this section. 1. The Purchase Order must include the name and address of the person or organization ordering the parts, who should be charged, and if possible, the serial number of the machine for which the parts were ordered.
BEARING MOUNT ASSEMBLY Ref. Part No. 264-004 356-310 A101-150 A101-152 A101-153 A101-155 264-014 A101-154 270-007 256-011 250-057 273-006 250-127 250-060 270-002 271-006 257-009 256-001 A101-156 256-017 250-018 255-013 341-6241 A101-157 A101-158 NOTE: USE LONG SPACER (ITEM 24, 1.151" LONG) FIRST AND IF TOO LONG TO ALLOW THE TRACTOR SHAFT TO BOLT ON USE SHORT SPACER (0.871"...
Page 11
A101-131 362-011 FLX15/10 09/05 FRAME ASSEMBLY Description FLX15 Main frame FLX10 Main frame *not shown Tension bushing, 1-1/2" x 1-3/4" x 1" long **not required on FLX10 Bolt, 3/8" x 2-1/4" UNC Locknut, 3/8" UNC Transport light mount Locknut, 5/16" UNC Washer, 5/16"...
Ref. Part No. 257-014 256-510 256-003 A101-122 A101-123 364-001 273-006 270-001 A101-124 A101-120 250-114 208-026 250-050 270-007 * Refer to the Assembly Section in the front of this Manual for Belville washer orientation FLX15/10 09/05 CASTOR WHEEL ASSEMBLY Description Jam nut, 3/4" UNF Belville washer, 60 x 20.5 x 2.5mm Washer, 3/4"...
SAFETY TOW CHAIN (S000-010) NOTE: This safety chain is intended as an auxiliary attaching system per ASAE S338.3. The safety chain help control the flex arm should it accidentally separate from the drawbar, or the rotary cutter should it accidentally separate from the flex arm.
Description Light set, left and right dual lights FLX15 Includes a 7 pin ag plug, & harness Light set, left and right dual lights FLX10 Includes a 7 pin ag plug, & harness Locknut, 3/8" UNC Rear beam light mount U-bolt, 5"...