Magnetic Card Reader Installation - GE MAC 5000 Service Manual

Magnetic Card Reader Installation

3-10
Installation: Preparation for Use
The Magnetic Card Reader and its mounting bracket are assembled and
ready to install on the trolley. Parts are included for two different trolley
styles. Disregard and do not use the parts indicated in the following
illustration.
Card Reader
Assembly
To install the Magnetic Card Reader and its mounting bracket on the
trolley, complete the following steps:
1. Remove both end panels by pulling out and up at the bottom.
2. Using a Phillips screw driver, fasten the card reader assembly under
the front handle. Align with holes provided under front handle.
MAC™ 5000 resting ECG analysis system
2024917-010
Do Not Use
These Parts
31A
19A
33A
Revision B