Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Trend Micro TPS TX Series
Summary of Contents for Trend Micro TPS TX Series
- Page 2 Certain features available in Trend Micro products collect and send feedback regarding product usage and detection information to Trend Micro. Some of this data is considered personal in certain jurisdictions and under certain regulations. If you do not want Trend Micro to collect personal data, you must ensure that you disable the related features.
-
Page 3: Tps Tx Series Devices
Alternatively, you can manage devices by using the Security Management System (SMS) console. Learn more about each TPS product in the following sections: • TPS TX Series devices • TPS 2200T device •... -
Page 4: Tps 2200T Device
TPS Hardware Specification and Installation Feature TX Series devices Power supply Two hot-swappable 750W AC power supplies External storage One 32 GB SSD Replaceable fans 7 hot-swappable fans TPS 2200T device The TPS 2200T device provides the following hardware features. Feature 2200T device Ports... -
Page 5: Tps Tx Series Product Overview
3 external fans (not replaceable) Dedicated High Availability (HA) port Zero Power High Availability (ZPHA) Built-in ZPHA for copper segments TPS TX Series product overview The following topics describe the components, chassis, requirements, and installation specifics of the TPS 8200TX and 8400TX devices: •... - Page 6 TPS Hardware Specification and Installation Chassis – front panel Refer to the following illustration for a front panel view of the TX Series 1 U (8200TX) and 2 U (8400TX) devices: I/O modules SP ports External storage 1.8-inch SSD (32 GB) Stack Master LED Stack LED Bypass LED...
-
Page 7: Chassis - Rear Panel
External SSD The TPS TX Series device includes an external SSD module that ships pre-installed with your product. The SSD is used to store traffic logs, snapshots, and other system data. You can remove and install the card while the device is running; however,... -
Page 8: Chassis Leds
Learn more about these external user disk commands. Ports The TPS TX Series devices come equipped with network slots for standard or bypass I/O modules. In addition, the device provides a console and management port: 1 RJ-45 serial console port... -
Page 9: Model Requirements
Link LED: Solid green indicates that the port is linked and ready for data. • Activity LED: Flashing amber indicates that the port is passing data. Model requirements Refer to the following topics for specific requirements of the TPS TX Series devices. • Power requirements •... -
Page 10: Before You Begin
TPS Hardware Specification and Installation • Module LEDs • I/O module replacement • Supported transceivers and cables for TippingPoint I/O modules Before you begin • Review the release notes for your product for any late-breaking changes to the installation instructions. •... - Page 11 TPS Hardware Specification and Installation Standard I/O Modules Bypass I/O Modules 6-Segment Gig-T 4-Segment Gig-T Bypass Module Ports: 12 Fixed RJ-45 copper ports Ports: 8 copper ports Port speed: 10/100/1000 Mbps Port speed: 10/100/1000 Mbps Part number: TPNN0059 Part number: TPNN0070 6-Segment GbE SFP 2-Segment 1G Fiber SR/LR Bypass Module Ports: 4 Multi-Mode (SR)/Single-Mode (LR) Fiber (LC type)
-
Page 12: Module Leds
TPS Hardware Specification and Installation Standard I/O Modules Bypass I/O Modules 1-Segment 40 GbE QSFP+ Ports: 2 Fiber QSFP+ ports Port speed: 40 Gbps Part number: TPNN0069 CAUTION! Handle all I/O modules with care. The bypass modules contain mechanical switches that are very sensitive to handling when not installed in the system. -
Page 13: Supported Transceivers And Cables For Tippingpoint I/O Modules
SMS, LSM, or CLI documentation. Supported transceivers and cables for TippingPoint I/O modules For a list of supported transceivers and cables for TippingPoint I/O modules, refer to I/O Modules Overview. Technical specifications The TPS TX Series devices have the following specifications. Specification Description Dimensions 8200TX device (1 U form factor) –... -
Page 14: Chassis - Front Panel
TPS Hardware Specification and Installation TPS 2200T device overview The following topics describe the components, chassis, requirements, and installation specifics of the TPS 2200T device: • Chassis – front panel • Chassis – rear panel • Chassis – features • Model requirements •... -
Page 15: System Status Indicator
TPS Hardware Specification and Installation Power button Alert indicator 10. System status indicator Chassis – rear panel Refer to the following illustration for a rear-panel view of the TPS 2200T device. Fans (3) Power supplies (2) Chassis – features Refer to the following topics for information about the TPS 2200T chassis features: •... -
Page 16: Alert Indicator
TPS Hardware Specification and Installation • Solid Green — Device is running in a healthy state. • Solid Yellow — Device is running but has a health rating below the acceptable threshold. Alert indicator Refer to the Alert indicator on the right side of the front panel to learn whether the device is in L2FB mode or not. •... -
Page 17: Pluggable Transceivers
TPS Hardware Specification and Installation Link LED In addition, the 2200T device comes equipped with eight 1G copper ports, eight 1G SFP ports, and four 10G SFP+ ports. An external ZPHA device provides ZPHA bypass support for SFP/SFP+. Model requirements Refer to the following topics for specific requirements of the TippingPoint 2200T device. -
Page 18: Tps 440T Product Overview
TPS Hardware Specification and Installation Fiber Input Signal Right side Receive Technical specifications The TPS 2200T device has the following specifications. Specification Description Dimensions 2 U form factor – 3.46 in (H) x 16.77 in (W) x 18.80 in (D) (8.80 cm x 42.60 cm (unpackaged) x 47.80 cm) Weight... - Page 19 TPS Hardware Specification and Installation Chassis – front panel Refer to the following illustration for a front panel view of the TPS 440T device. CFast card 1 GbE copper ports Dedicated HA port Serial console port/Management port Alert indicator System status indicator Power indicator Chassis –...
- Page 20 TPS Hardware Specification and Installation AC power connector Power switch Chassis – features Refer to the following topics for information about the TPS 440T chassis features: • System status indicator • Alert indicator • Fans and power supplies • External storage card •...
- Page 21 TPS Hardware Specification and Installation Ports The TPS 440T device comes equipped with eight copper ports. In addition, the device includes the console and management ports shown in the following figure. 1 RJ-45 serial console port 1 GbE copper management port Activity LED Link LED Model requirements...
-
Page 22: Install Your Tps Device
TPS Hardware Specification and Installation Technical specifications The TPS 440T device has the following specifications. Specification Description Dimensions 1 U form factor – 1.73 in (H) x 16.78 in (W) x 17.72 in (D) (4.40 cm x 42.62 cm x (unpackaged) 45.00 cm) Weight... - Page 23 Use this pre-formatted, hot-swappable user disk to store system logs, snapshots, and other system data. The external SSD module comes pre-installed in the TPS 8200TX and 8400TX security devices. If you have a TPS TX Series device, you can skip this step.
-
Page 24: Add The I/O Modules - Tps Tx Series
UPS. Add the I/O modules – TPS TX Series TPS TX Series devices come with blank modules inserted into I/O module slots. The TPS 8200TX provides two I/O slots and the TPS 8400TX provides four I/O slots. -
Page 25: Attach The Cables
TPS Hardware Specification and Installation Attach the cables During initial setup, use the console port to access the setup wizard. Connect the console port Procedure Connect the RJ-45 null modem cable to the console port on the front of the unit. Connect the other end of your cable (standard USB connector) to your computer. -
Page 26: Install Your License Package
TPS Hardware Specification and Installation After you run the setup, you can further configure your system using subsequent setup commands through the device CLI. See the TPS Command Line Interface Reference for detailed command descriptions. Specify a security level (None, Low, Medium, or High). The security level you select determines your password complexity requirements. -
Page 27: Power Supplies
• AC power supply – TPS 2200T and TX Series • DC power supply – TPS TX Series WARNING! Your product might have more than one power supply source. All power sources must be removed to de-energize the unit. The TPS 2200T device has hot-swappable power supplies; there are no other serviceable parts inside. There are no hot- swappable or serviceable parts inside the TPS 440T device. -
Page 28: Connect The Ac Power Supply
DC power supply – TPS TX Series The TPS TX Series devices are NEBS compliant and can accept a combination of AC and DC power supply units. Consult your TippingPoint account contact for more information on obtaining DC power supplies. - Page 29 TPS Hardware Specification and Installation CAUTION! Do not attach a ground wire to the ground screw on the DC power supply module. Attach the ground wire to the 2200T chassis DC grounding screw holes (0.63-inch hole spacing) with #10 screws. The DC grounding screw holes are located in the rear of the chassis.
-
Page 30: Replace The Fan - Tps Tx Series
The TPS TX Series devices include seven cooling fans. The fans for the 8200TX and 8400TX devices are redundant and hot- swappable. You can replace an individual fan without powering down the device. -
Page 31: Install The Retention Bracket
TPS Hardware Specification and Installation Use the information in the following topics to manage the power cord retention bracket: • Install the retention bracket • Attach the power cord retention bracket • Remove the bracket Install the retention bracket The following figure shows the back panel of a TPS 2200T device with the power cord retention bracket installed: To install the retention bracket: Procedure Orient the bracket against the back surface of the chassis. -
Page 32: External User Disk
External user disk commands External SSD The TPS TX Series devices come with a pre-formatted external SSD. Use the 32 GB external SSD to store traffic logs, snapshots, and other system data. Only SSDs available from TippingPoint have been validated to achieve optimal performance with TippingPoint products. -
Page 33: External User Disk Commands
TPS Hardware Specification and Installation Only CFast cards available from TippingPoint have been validated to achieve optimal performance with TippingPoint products. Other vendor cards are not supported. Using other vendor cards could be detrimental to proper operation of the TippingPoint system. You can replace the CFast card when the system is operating. - Page 34 TPS Hardware Specification and Installation Command Description Encrypts the external user disk and the system keystore by master-key set using the system master key. You are prompted to enter a master key that is between 9 and 32 characters in length, contains a combination of numbers and uppercase and lowercase letters, and that has at least one special character (for example,...
Need help?
Do you have a question about the TPS TX Series and is the answer not in the manual?
Questions and answers