Hdmi switch with integrated multi-view technology (48 pages)
Summary of Contents for CYP EL-41PIP
Page 1
All manuals and user guides at all-guides.com EL-41PIP 4-Way HDMI Switch with Integrated Picture-in-Picture (PIP) Technology OPERATION MANUAL...
Page 2
All manuals and user guides at all-guides.com...
Page 3
All manuals and user guides at all-guides.com DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. CYP (UK) Ltd assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
Page 4
All manuals and user guides at all-guides.com SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: •...
All manuals and user guides at all-guides.com 1. INTRODUCTION The EL-41PIP is an advanced 4 Way HDMI switch with integrated Multi- view (Picture In Picture) technology. This plug and play solution offers advanced control and display options for the integration of 4 sources onto a single display.
All manuals and user guides at all-guides.com 5. FEATURES Integration of up to 4 sources on a single display Multiple screen layout configurations Seamless switching of channels and on screen windows Fade in out display functionality Ability to mirror and rotate images Zoom &...
All manuals and user guides at all-guides.com 6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel WINDOW POWER MENU CHANNEL INPUT 1 2 3 4 2 3 4 IR WINDOW: Accepts the IR signal from the supplied remote control. POWER: Press to turn the unit on or to put it into standby mode. MENU Button: Press this button to bring up the On-screen Display (OSD) menu on screen.
All manuals and user guides at all-guides.com 6.2 Rear Panel HDMI IN HDMI OUT CONTROL RS232 DC 12V SERVICE ONLY HDMI IN 1~4: Connect to up to four source HDMI equipped source devices such as DVD/Blu-ray players and or PC/Laptop devices. HDMI OUT: Connect to a HD TV/monitor or HDMI matrix for display of the image.
All manuals and user guides at all-guides.com 6.3 Remote Control Power: Press this button to switch the Info Power device on or to set it to standby mode. CH 1 CH 2 Info: Press this button to display the CH 3 device’s firmwareersion.
All manuals and user guides at all-guides.com 6.4 RS-232 Protocols UNIT Remote Control Assignment Assignment Baud Rate: 115,200 bps Data Bit: 8 bits Parity: None Flow Control: None Stop Bit: 1...
Page 13
All manuals and user guides at all-guides.com Command Description HSIZE 1~4 0~X** SET IMAGE HORIZONTAL SIZE (1~4) CHANNEL, (0~X) X=HORIZONTAL PIXEL FOR CURRENT RESOLUTION VSIZE 1~4 0~X** SET IMAGE VERTICAL SIZE (1~4) CHANNEL, (0~X) X=VERTICAL PIXEL FOR CURRENT RESOLUTION HPOS 1~4 0~X** SET HORIZONTAL POSITION OF SPECIFIED CHANNEL (1~4) CHANNEL, (0~X) X=HORIZONTAL PIXEL FOR CURRENT RESOLUTION...
Page 14
All manuals and user guides at all-guides.com Command Description ROTATE 0~3* SET VIDEO ROTATION VIDEO TO PRESET POSITIONS (0) ROTATE OFF, (1) R90, (2) L90, (3) 180 CHRC R/G/B MIN/ SET THE RGB COLOUR RANGE FOR THE CHROMA KEY MAX 0~255* (R/G/B) COLOUR CHANNEL (MIN/MAX) COLOUR VALUE ++(0~15) SET PRESENT VALUE 0~255...
Page 15
All manuals and user guides at all-guides.com Command Description CH2004 Change CH2 to Source 4 CH3001 Change CH3 to Source 1 CH3002 Change CH3 to Source 2 CH3003 Change CH3 to Source 3 CH3004 Change CH3 to Source 4 CH4001 Change CH4 to Source 1 CH4002 Change CH4 to Source 2...
Page 16
All manuals and user guides at all-guides.com Command Description ROT001* Rotation Function R ROT002* Rotation Function L ROT003* Rotation Function Up-Side Down SFA001** Store window format to FAV 1 SFA002** Store window format to FAV 2 SFA003** Store window format to FAV 2 SFA004** Store window format to FAV 4 RFA001**...
Page 17
All manuals and user guides at all-guides.com Command Description POW 0/1 POWER THE UNIT ON/OFF (0) OFF, (1) ON AUDIO 1~4 CHANGE OUTPUT AUDIO TO SPECIFIED SOURCE (1~4) AUDIO SOURCE IMRE B/C/S/H RESET THE IMAGE TO FACTORY DEFAULTS (B) BRIGHTNESS, (C) CONTRAST, (S) SATURATION, (H) HUE PIRE RESET THE UNIT PICTURE SETTINGS TO FACTORY DEFAULTS CHRE 0~4**...
All manuals and user guides at all-guides.com 6.6 OSD Menu Main Menu Layer Layer Layer 480P, 579P, 720P50/60, 1080P24/25/30/50/60, 1024x768, 1280x800, 1280x1024, 1366x768, I/O Setup Output Resolution 1440x900, 1600x900, 1600x1200, 1680x1050, 1920x1200, NATIVE Menu Back Info Display On/Off H Offset 0~20 (5) V Offset 0~20 (5)
Page 19
All manuals and user guides at all-guides.com Main Menu Layer Layer Layer CH1 Wxxx Hxxx Width Unit Width Ten Size Width Hundred Height Unit Height Ten Height Hundred CH1 Hxxx Vxxx Channel 1 Select Horizontal Unit Horizontal Ten Position Horizontal Hundred Vertical Unit Vertical Ten Vertical Hundred...
Page 20
All manuals and user guides at all-guides.com Main Menu Layer Layer Layer CH3 Wxxx Hxxx Width Unit Width Ten Size Width Hundred Height Unit Height Ten Height Hundred CH3 Hxxx Vxxx Horizontal Unit Channel 3 Select Horizontal Ten Position Horizontal Hundred Vertical Unit Vertical Ten Vertical Hundred...
Page 21
All manuals and user guides at all-guides.com Main Menu Layer Layer Layer Window VIDEO 1/2/3/4 Setup VIDEO 1 (Cont.) VIDEO 2 VIDEO 1/2/3/4 Label Select VIDEO 3 VIDEO 1/2/3/4 VIDEO 4 VIDEO 1/2/3/4 Menu Exit FAV 1 Store ON/OFF/OK FAV 2 Store ON/OFF/OK Favours Store FAV 3 Store...
Page 22
All manuals and user guides at all-guides.com Main Menu Layer Layer Layer Mirror On/Off Off/1.0/1.1/1.2 Convert /1.3/1.4/1.5/1. 6/1.7/1.8/1.9/2.0/2.1/2 Fade In-Out Channel 3 Convert 2.3/2.4/2.5/2.6/ 2.7/2.8/2.9/3.0 R90/L90/Up-Side Rotation Down180/Off Window Reset Window Convert Menu Exit Mirror On/Off (Cont.) Off/1.0/1.1/1.2 Convert /1.3/1.4/1.5/1. 6/1.7/1.8/1.9/2.0/2.1/2 Fade In-Out Channel 4 Convert...
Page 23
All manuals and user guides at all-guides.com Main Menu Layer Layer Layer IP Mode Static/DHCP Static Set IP/Mask/Gate Byte1 High XXX 192 255 192 000~255 XXX 168 255 168 Byte2 000~255 Byte3 XXX 5 255 5 000~255 XXX 159 0 254 Byte4 Low 000~255 Ethernet...
All manuals and user guides at all-guides.com 6.7 Telnet Control Before attempting to use the telnet control, please ensure that both the Scaler (via the ‘CONTROL’ port) and the PC/Laptop are connected to the active networks. To access the telnet control in Windows 7, click on the ‘Start’ menu and type “cmd”...
Page 25
All manuals and user guides at all-guides.com This will bring us into the device which we wish to control. Type “?” to lists all the available commands. Type “IPCONFIG” To show all IP configurations. To reset the IP, type “IPMODE” to set static IP/DHCP (For a full list of commands, see Section 6.6).
All manuals and user guides at all-guides.com 6.8 WebGUI Control On a PC/Laptop that is connected to the same active network as the Scaler, open a web browser and type the device’s IP address on the web address entry bar. The browser will display the device’s Image Adjust, Output Resolution, etc.
Page 27
All manuals and user guides at all-guides.com Click on the ‘Windows Setup’ tab to set the output display format. Note: This function is only available under window E~H. Click on the ‘OSD Settings’ tab to set the OSD function and position.
Page 28
All manuals and user guides at all-guides.com Click on the ‘Window Convert’ tab to set the output display angle. Note: This function is only available under window A~D. Click on the ‘Chromakey Setup’ tab to set the output display colour. Note: This function is only available under window E~H.
Page 29
All manuals and user guides at all-guides.com Click on the ‘Ethernet’ tab to reset the IP configuration. The system will ask for a reboot of the device when any of these settings are changed. The IP address needed to access the Web GUI control will also need to be changed accordingly on the web address entry bar.
All manuals and user guides at all-guides.com 7. CONNECTION DIAGRAM HDMI Camera Blu-ray Player Set-top Box Games Console HDMI Inputs Router Smartphone or Tablet 4 3 2 1 Device Power HDMI IN HDMI OUT CONTROL RS232 DC 12V SERVICE Supply ONLY HDMI Output RS-232...
All manuals and user guides at all-guides.com 9. ACRONYMS ACRONYM COMPLETE TERM Consumer Electronics Control Digital V isual Interface HDCP High-bandwidth Digital Content Protection HDMI High Definition Multimedia Interface Picture-in-Picture Picture out of picture Infrared...
Page 34
All manuals and user guides at all-guides.com...
Page 35
All manuals and user guides at all-guides.com...
Page 36
All manuals and user guides at all-guides.com CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton, Middlesex, TW17 8BA Tel: +44 (0) 20 3137 9180 | Fax: +44 (0) 20 3137 6279 Email: sales@cypeurope.com www.cypeurope.com v1.02...
Need help?
Do you have a question about the EL-41PIP and is the answer not in the manual?
Questions and answers