English - Black & Decker FSL144 Manual

FLASHLIGHT FSL12/FSL144
CONGRATULATIONS!
You have chosen a Black & Decker tool. Our aim is
to provide quality tools at an affordable price.
We hope that you will enjoy using this tool for
many years.
INTENDED USE
Your Black & Decker flashlight FSL12/FSL144 has
been designed to provide additional lighting for
your DIY jobs. This tool is intended for consumer
use only.
SAFETY INSTRUCTIONS
Warning symbols
The following symbols are used in this manual:
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Read the manual prior to operation.
Fire hazard.
Know your tool
Warning! When using battery-powered
tools, basic safety precautions,
including the following, should always
be followed to reduce the risk of fire,
leaking batteries, personal injury and
material damage.
Read all of this manual carefully before
operating the tool.
Retain this manual for future reference.
FSL12_EUR.PM5
General
1. Use appropriate tool
The intended use is described in this
instruction manual. Warning! The use of any
accessory or attachment or performance of any
operation with this tool other than those
recommended in this instruction manual may
present a risk of personal injury.
2. Check for damaged parts
Before use, carefully check the tool for
damage. Ensure that the tool will operate
properly and perform its intended function.
Do not use the tool if any part is damaged or
defective. Have any damaged or defective
parts repaired or replaced by an authorised
repair agent. Never attempt any repairs
yourself. Do not use the tool if the switch does
not turn it on and off.
3. Remove the battery
Remove the battery when the tool is not in use,
before changing any parts of the tool,
accessories or attachments and before servicing.
4. Store idle tools
When not in use, tools, batteries and chargers
should be stored in a dry, locked up or high
place, out of reach of children.
5. Repairs
This tool complies with relevant safety
requirements. Repairs should only be carried
out by qualified persons using original spare
parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for batteries
Never attempt to open for any reason.
Do not expose to water.
Do not store in locations where the
temperature may exceed 40 °C.
Charge only using the charger provided with
the tool.
Charge only at ambient temperatures between
4 °C and 40 °C.
5
E N G L I S H
06-12-2000, 12:15
5