Switch Off At; Switch Off After; Teatimer; Volume - Miele CVA 744C Operating And Installation Instructions

Table of Contents

Advertisement

Settings
dispensed, the machine will not switch
itself on again automatically. This
prevents the coffee machine from
switching itself on unnecessarily, for
example, whilst you are away on
holiday.
The programmed times will, however,
remain in memory and will be
reactivated after manually switching the
machine on again.
If you have switched on the time display
for the switched off appliance (
or
On
Night dimming
the desired switch-on time will appear
in the display up to 23:59 hours ahead
of time.

Switch off at

The coffee machine switches off at a
particular time.
In the event of a longer absence, the
programmed times will remain in
memory and will be reactivated after
manually switching the machine on
again.

Switch off after

The coffee machine switches off after a
particular length of time if no sensors
have been touched.
Under the default settings the coffee
machine switches off after 20 minutes.
You can change this preset to a time of
between 20 minutes and 9 hours.

TeaTimer

You can use the TeaTimer to start a
minute minder when making tea (see
"Making drinks - TeaTimer").
44
Show
) the  symbol and

Volume

You can set the volume of buzzer and
keypad tones using the segment bar.
The welcome melody that sounds when
the On/Off  sensor is touched can be
switched on or off.

Display brightness

You can set the display brightness
using the segment bar.
|

Lighting

You can adjust the brightness of the
lighting when the machine is switched
on or off.
You can also set for the switched off
appliance the length of time after which
the lighting should switch off (between
15 minutes and 9 hours).

Info (display information)

You can display the number of drink
portions or the number of possible
portions before maintenance
programmes are necessary.

Altitude

If the coffee machine is installed at high
altitudes, the lower air pressure will
cause the water to boil at a lower
temperature. You can set the local
altitude of the machine to ensure that
the correct temperatures are achieved.

Performance mode

You can select the most suitable
performance mode for your type of use.
Eco mode
is set as standard.

Advertisement

Table of Contents
loading

Table of Contents