Download  Print this page

Before Plugging In; Hand Blender - Kenwood Triblade HDP10 Instructions Manual

Hide thumbs

Advertisement

before plugging in

Make sure your electricity supply is
l
the same as the one shown on the

hand blender.

Important - UK only
The wires in the cord are coloured
l
as follows:
Blue = Neutral
Brown = Live.
The appliance must be protected by
l
a 13A approved (BS1362) fuse.
Note:
For non-rewireable plugs the fuse
l
cover MUST be refitted when
replacing the fuse. If the fuse
cover is lost then the plug must
not be used until a replacement
can be obtained. The correct fuse
cover is identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
If a non-rewireable plug is cut
l
off it must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
l
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first time
Throw away the blade covers from
l
the Triblade™ and the chopper
blade as they are to protect the
blade during manufacture and transit
only. Take care as the blades
are very sharp.
Wash all parts - see "care and
l
cleaning".
key
hand blender
ON button
1
Turbo button
2
power handle
3
blender shaft with fixed triblade.
4
beaker (if supplied)
beaker
5
A
whisk (if supplied)
whisk collar
6
wire whisk
7
B
chopper (if supplied)
chopper cover
8
finger grip
9
chopper blade
bk
bowl
bl
rubber ring base
bm
4

Advertisement

loading

  Also See for Kenwood Triblade HDP10

  Related Content for Kenwood Triblade HDP10