Philips 8000 Series Service Manual page 16

EN 16 4. Q551.1E LA
Figure 4-17 LCD panel
1. Remove all boards as described earlier.
2. Remove the tweeters as described earlier.
3. Remove the central subwoofer as described earlier.
4. Remove the tweeters as described earlier.
5. Disconnect the Ambilight flat foils as described earlier.
6. Remove the WiFi antenna boards where applicable as
described earlier.
7. Remove the plastic rim as described earlier.
8. Tilt the metal rims [1] on top and both sides of the set as
shown in the picture.
Now the LCD Panel can be lifted from the front cabinet.
2010-Jun-25
Mechanical Instructions
4.6
1
1
18750_116_100415.eps
100415
back to
div. table
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
• While re-assembling, make sure that all cables are placed
and connected in their original position.
• Pay special attention not to damage the EMC foams in the
set. Ensure that EMC foams are mounted correctly.