Placing/Removing The Pouring Shield; Using The Pouring Shield - KitchenAid 5KSM156 Manual

aSSEmblINg thE StaND mIxEr

Placing/removing the pouring shield*

to place pouring shield: Turn speed
1
control to "O". Unplug Stand Mixer.
Attach your chosen accessory, see
"Attaching/removing the flat beater, wire
whip, or dough hook" section.
to remove pouring shield: Turn
3
speed control to "O". Unplug Stand
Mixer.

Using the pouring shield*

Use the pouring shield to avoid having ingredients splashing out of the bowl when mixing,
as well as to easily pour ingredients in the bowl while mixing.
For best results, rotate the shield so the
1
motor head covers the U-shaped gap
in the shield. The pouring chute will be
just to the right of the attachment hub
as you face the Stand Mixer.
* Included only in models 5KSM150PS and 5KSM45. Also available as optional accessory.
12
From the front of the Stand Mixer, slide
2
the pouring shield over the bowl until
the shield is centered. The bottom rim
of the shield should fit within the bowl.
Lift the front of the pouring shield
4
clear of the bowl rim and pull forward.
Remove attachment and bowl.
Pour the ingredients into the bowl
2
through the pouring chute.