The Siemon Company Block S66M1-50 Specifications

S66M1-50 BLOCK
The S66M1-50 is fully compatible with all industry standard accessories while
providing a proven, economical solution for terminating high performance
cable. The wide range of mounting accessories allows the S66M1-50 to be
installed in almost any environment.
Category 5e S66
™
clip design provides
high-performance
and durability
.
W W W S I E M O N
Terminates 20.81 - 0.41mm solid insulated cable
or 1.02 - 0.91mm solid stripped cable
High impact flame
retardant thermoplastic
Fanning strips provide management for
horizontal cabling and cross-connect
jumper wires and provides a labeling
surface for circuit identification
10.2mm
5.1mm
Standard pair spacing
10.2mm
4.8mm
Category 5e pair spacing
.
C O M
Mounts to S89 series stand-off brackets
to provide space for routing cables
behind each block
25.7mm
19.7mm
Category 3 Category 5e
The category 5e S66 block uses the same center
spacing between pairs as voice grade blocks and
is fully compatible with all industry standard 66
accessories (such as tools, test adapters,
mounting brackets, bridging clips, etc.)
Each pair of S66 clips is slightly closer
together, creating additional space between
conductors of adjacent pairs for reduced Near-
End Crosstalk
Patented category 5e rated S66 quick clip reduces
reactive coupling between positions, improving
Near-End Crosstalk (NEXT) performance