Related Manuals for Texas Instruments SLOU023A
Summary of Contents for Texas Instruments SLOU023A
- Page 1 TPA112 MSOP Audio Power Amplifier Evaluation Module User’s Guide 2001 Mixed-Signal Products SLOU023A...
-
Page 2: Important Notice
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgment, including those pertaining to warranty, patent infringement, and limitation of liability. - Page 3 Trademarks TI is a trademark of Texas Instruments Incorporated. Preface Chapter Title—Attribute Reference...
-
Page 5: Table Of Contents
Introduction ..............Feature Highlights . - Page 6 Running Title—Attribute Reference Figures 1–1 The TI TPA112 MSOP Audio Amplifier Evaluation Module 2–1 Quick Start Platform Map ............2–2 Quick Start Module Map .
-
Page 7: Introduction
This chapter provides an overview of the Texas Instruments (TI ) TPA112 MSOP audio amplifier evaluation module (SLOP126). It includes a list of EVM features, a brief description of the module illustrated with a pictorial diagram, and a list of EVM specifications. - Page 8 Features 1.1 Features The TI TPA112 MSOP audio amplifier evaluation module and the TI plug-n-play audio amplifier evaluation platform include the following features: TPA112 MSOP Stereo Audio Power Amplifier Evaluation Module Dual channel, single-ended operation 150-mW output power per channel into 8 2.5-V to 5.5-V operation Distortion —...
-
Page 9: Description
1.2 Description The TPA112 MSOP audio power amplifier evaluation module is a complete, low-power stereo audio power amplifier for high-fidelity line-level output, headphone, and small speaker applications. It consists of the TI TPA112 150-mW stereo audio power amplifier IC in a very small MSOP package, along with a small number of other parts mounted on a circuit board that is approximately one and a quarter inches square (Figure 1–1). - Page 10 Introduction...
-
Page 11: Quick Start
The steps in this chapter can be followed to quickly prepare the TPA112 MSOP audio amplifier EVM for use. Using the TPA112 MSOP EVM with the TI plug-n-play audio amplifier evaluation platform is a quick and easy way to connect power, signal and control inputs, and signal outputs to the EVM using standard connectors. -
Page 12: Precautions
Precautions 2.1 Precautions Power Supply Input Polarity and Maximum Voltage Always ensure that the polarity and voltage of the external power connected to V input connector J6 are correct. Overvoltage or reverse-polarity power applied to these terminals can open onboard soldered-in fuses and cause other damage to the platform, installed evaluation modules, and/or the power source. -
Page 13: Quick Start List For Platform
2.2 Quick Start List for Platform Follow these steps when using the TPA112 MSOP EVM with the TI plug-n-play audio amplifier evaluation platform (see the platform user’s guide, SLOU011, for additional details). Numbered callouts for selected steps are shown in Figure 2–1 and details appear in Chapter 3. -
Page 14: Quick Start List For Stand-Alone
Quick Start List for Stand-Alone 2.3 Quick Start List for Stand-Alone Follow these steps to use the TPA112 MSOP EVM stand-alone or to connect it into existing circuits or equipment. Connections to the TPA112 MSOP module header pins can be made via individual sockets, wire-wrapping, or soldering to the pins, either on the top or the bottom of the module circuit board (Figure 2–2). -
Page 15: Details
This chapter provides details on the TPA112 IC, the evaluation module, the steps in the Quick-Start List, additional application information, and a parts list for the TPA112 MSOP evaluation module. Topic Precautions ..........The TPA112 MSOP Audio Power Amplifier Evaluation Module Using The TPA112 MSOP EVM With The Plug-N-Play Evaluation Platform... -
Page 16: Precautions
Precautions 3.1 Precautions Power Supply Input Polarity and Maximum Voltage Always ensure that the polarity and voltage of the external power connected to V input connector J6 are correct. Overvoltage or reverse-polarity power applied to these terminals can open onboard soldered-in fuses and cause other damage to the platform, installed evaluation modules, and/or the power source. -
Page 17: The Tpa112 Msop Audio Amplifier Evaluation Module
3.2 The TPA112 MSOP Audio Power Amplifier Evaluation Module The TPA112 MSOP audio power amplifier evaluation module is powered by a TPA112 150-mW stereo audio amplifier IC. It can drive either line-level outputs, 32- amplifier (TLV2211) on the module provides a buffered midpoint voltage to properly bias the noninverting inputs of the TPA112 amplifier IC. -
Page 18: Tpa112 Audio Amplifier Ic
The TPA112 MSOP Audio Power Amplifier Evaluation Module 3.2.1 TPA112 Audio Amplifier IC The TPA112 audio amplifier IC is a CMOS device intended primarily for high-performance line-level output, headphone driver, and small speaker applications. It is supplied in both a SOIC and a very small surface-mount MSOP package and has been designed to operate from low supply voltages (between approximately 2.5 V and 5.5 V) and to deliver up to approximately 150 mW into 8-... -
Page 19: Module Gain
The TPA112 MSOP Audio Power Amplifier Evaluation Module 3.2.2 Module Gain The TPA112 MSOP evaluation module has a set gain of 4 (inverting) for each channel. However, the gain can be adjusted to a maximum of approximately 10 (inverting) by changing the value of feedback resistors (R8 and R10, Figure 3–3). -
Page 20: Using The Tpa112 Msop Evm With The Plug-N-Play Evaluation Platform
Using The TPA112 MSOP EVM With the Plug-N-Play Evaluation Platform 3.3 Using The TPA112 MSOP EVM With the Plug-N-Play Evaluation Platform The TPA112 MSOP audio amplifier evaluation module is designed for use with the TI plug-n-play audio amplifier evaluation platform. It simply plugs into socket U5. -
Page 21: Signal Routing
Using The TPA112 MSOP EVM With the Plug-N-Play Evaluation Platform 3.3.2 Signal Routing Signal flow on the platform is controlled by two signal routing switches, as shown in Figure 3 – 5. Figure 3–5. Platform Signal Routing and Outputs Audio Signal Input Conditioning... -
Page 22: Power Requirements
Using The TPA112 MSOP EVM With the Plug-N-Play Evaluation Platform 3.3.3 Power Requirements The TPA112 MSOP audio power amplifier evaluation module can operate from voltage between approximately 2.5 V and 5.5 V. The TI plug-n-play audio amplifier evaluation platform with a voltage regulator EVM installed on it can provide a regulated 3.3-V or 5-V V wide variety of unregulated V and 12 V, including an onboard 9 -V battery. -
Page 23: Inputs And Outputs
Using The TPA112 MSOP EVM With the Plug-N-Play Evaluation Platform 3.3.4 Inputs and Outputs The TI plug-n-play audio amplifier evaluation platform is equipped with several standard conectors for audio inputs and outputs. 3.3.4.1 Inputs In most cases, audio signals enter the platform through either a pair of RCA phono jacks (J3 and J5) or a miniature (1/8 ) stereo phone jack (J4). -
Page 24: Using The Tpa112 Msop Evm Stand-Alone
Using The TPA112 MSOP EVM Stand-Alone 3.4 Using The TPA112 MSOP EVM Stand-Alone Using the TPA112 MSOP audio power amplifier evaluation module stand-alone is much the same as using it with the platform. The same 2.5-V to 5.5-V power supply requirement exists. 3.4.1 TPA112 MSOP EVM Connected as a Stereo Headphone Amplifier Figure 3–7. -
Page 25: Tpa112 Msop Evm Parts List
3.5 TPA112 MSOP Audio Power Amplifier Evaluation Module Parts List Table 3–1. TPA112 MSOP EVM Parts List Ref. Description C3, C6 Capacitor, 1 F, +80%/ –20%, nonpolarized, SMD Capacitor, 10 F, 6.3 V, C1, C2, Capacitor, 0.1 F, +80%/ C4, C7 –20%, nonpolarized, SMD R1, R9, Resistor, 20 k , 1/16 W,... - Page 26 3-12 Details...
Need help?
Do you have a question about the SLOU023A and is the answer not in the manual?
Questions and answers