Download Print this page

AEG DB61 Series Instruction Book page 8

Hide thumbs

Advertisement

FABRIC
Cotton
Corduroy
Linen
Denim
Varied ironing speed and fabric dampness might cause optimal setting to differ from that recommended in the table!
TROUBLESHOOTING
PROBLEM
Soleplate is not heating even though
iron is turned on.
Iron does not produce steam.
Spray function does not work.
Steam jet and vertical steam jet function
does not work.
DISPOSAL
This symbol on the product indicates that this product contains a battery which shall not be disposed with
normal household waste.
This symbol on the product or on its packaging indicates that the product may not be treated as household
waste. To recycle your product, please take it to an official collection point or to an AEG service center that can
remove and recycle the battery and electric parts in a safe and professional way. Follow your country's rules for
the separate collection of electrical products and rechargeable batteries.
AEG reserves the right to change products, information and specifications without notice.
www.aeg.com
DB61XX_SteamIron_AEG_NEW2.indd 8
TEMPERATURE SETTING
IRONING RECOMMENDATION
Use steam medium to high.
Steam iron on wrong side or use ironing cloth.
Iron on wrong side or use ironing cloth to prevent shine marks, especially with
to "max"
dark colours. Use steam medium to high.
to "max"
Use maximum steam.
POSSIBLE CAUSE
Connection problem
Temperature control is in MIN position.
Not enough water in tank.
Steam control is selected in non-steam position.
Selected temperature is lower than that specified
to use with steam.
Not enough water in tank.
Steam jet function was used very frequently within
a short period.
Iron is not hot enough.
SOLUTION
Check main power supply cable, plug and outlet.
Select adequate temperature.
Fill water tank (see "Getting started", no 2).
Set steam control between positions of
minimum steam and maximum steam (see
"Ironing chart").
Increase temperature to at least
.
Fill water tank (see "Getting started", no 2).
Put iron on horizontal position and wait before
using steam jet function.
Adjust the proper temperature to steam ironing
(up to
). Put iron in vertical position and wait
until temperature indicator light turns off.
2017-06-05 10:43:10
8

Advertisement

loading