Husqvarna 531RB Workshop Manual page 41

3. Remove the fuel hose from the carburetor.
4. Remove the starter. Refer to
standard starter on page 14 .
5. Remove the starter pawl. Refer to
starter pawl assembly on page 19 .
6. Remove the muffler cover and muffler. Refer to
remove and install the muffler on page 20 .
7. Remove the cylinder cover and the heat shield.
8. Remove the spark plug cap and the spark plug.
9. Remove the ignition system and the clutch. Refer to
To disassemble and assemble the ignition system
on page 33 .
10. Remove the air filter cover, the air filter and the air
filter holder. Refer to
filter on page 20 .
11. Remove the carburetor, the distance piece and the
heat shield. Refer to
the carburetor on page 25 .
12. Remove the cylinder and the piston. Refer to
disassemble the cylinder and piston on page 35 .
935 - 001 -
To disassemble the
To replace the
To remove and install the air
To disassemble and assemble
13. Remove the screw and remove the plate.
14. Remove the nut and the washer.
To
To
Repair instructions- 41