Husqvarna 531RB Workshop Manual page 25

19. Screws
20. Adapter
21. Screws
22. Washers
23. Fuel valve
24. Gasket
25. Fuel drain screw
26. O-ring
27. Choke lever screw
7.6.6 To disassemble and assemble the carburetor
CAUTION: Before you do maintenance on the
engine, the fuel valve must be closed.
1. Pull up the knob and remove the drive shaft tube.
2. Disconnect the cables and throttle wire.
3. Remove the air filter and air filter holder. Refer to
remove and install the air filter on page 20 .
935 - 001 -
4. Open the clamp and remove the fuel hose from the
carburetor.
5. Remove the screws (A) and remove the carburetor
(B), gaskets (C and E) and the distance piece (D).
A
B
To
D
E
C
Repair instructions- 25