Dialed Numbers Clear Logs Times & Costs MESSAGES Received Messages Saved Messages New Messages Message Settings Voicemail Info Messages Phonecell SX5D GSM ® MAIN MENU CALL DIVERT All Calls When Busy No Answer Not Found Cancel All Diverts CLOCK Set Alarm...
TERMS AND CONDITIONS FOR USE OF PHONECELL These Terms and Conditions are a legal contract between you and Telular Corporation for the title to and use of the Product. BY RETAINING AND USING THE PRODUCT AFTER RECEIPT OF IT, YOU AGREE TO THE TERMS AND CONDITIONS INCLUDING WARRANTY DISCLAIMERS, LIMITATIONS OF LIABILITY AND INDEMNIFICATION PROVISIONS BELOW.
Page 7
Sending and Receiving Digital Fax ...31 PERSONAL LEAST COST ROUTING OPTION ...32 ANALOG FAX OPTION ...34 TECHNICIAN COMMANDS ...35 SAFETY INFORMATION ...36 WARRANTY ...38 APPENDIX A: Set PC Serial Ports for Phonecell Digital Fax/Data ...40 Phonecell SX5D GSM ® Technical Manual...
1) Connect the handset cable to the phone jack - see Figure 7. 2) Connect the handset cable to the handset. Phone jack Handset cable Figure 7 – SX5D handset connection. Phonecell SX5D GSM ® Figure 6 - SX5D location. Handset Technical Manual...
2) Snap the wedge tabs on the other end of the wedge into the bottom wedge tab slots - see Figure 11. Figure 10 - Wedge tab slots. Phonecell SX5D GSM ® Attach thick end of wedge at top of the SX5D.
(1/8 inches) between the screw head and the wall. 4) Align the mounting holes with the screws and mount the SX5D onto the screws - see Figures 14 and 15. Figure 14 – SX5D mounting hooks. Phonecell SX5D GSM ® Remove Mounting Clip from the Cradle...
4) Check the cellular signal strength and move the unit until you achieve the best signal possible - see the Service Indication section of this manual. Wall Socket Figure 16 – SX5D AC power connection. Phonecell SX5D GSM ® AC Power Input AC Power Cord Barrel Connector...
The more bars, the stronger the signal. Figure 18 – SX5D LCD display icons. Phonecell SX5D GSM ® Speaker - Indicates speaker phone is activated. LCD Soft Key Labels - Provide access to features within the sub-menus of the SX5D.
Full Service When the power cord is connected properly, the SX5D will dis- play the Telular logo, emit a power-on tone, and the LED will light up. After a few seconds, the greeting and mobile number will dis- play. If service is available, the antenna icon will display indicator lines to display the signal strength.
3) To reactivate the call, press the MENU key, then select Retrieve. Adjust Volume 1) While in a call, press the UP/Down Volume Keys to raise or lower the handset/speakerphone volume. Phonecell SX5D GSM ® Making Calls. Receive a Call When Caller ID is Activated. Mute a Call.
3) Use the arrow keys to scroll through the alert types. 4) Select the alert to be changed. 5) Select the desired alert sound. NOTE: If Off is selected, no alert will sound. Phonecell SX5D GSM ® Set the Date. Set the Time. Adjust Alert Volume.
7) Press OK to save the entry and return to the Phonebook menu. If you have additional num- bers (up to 2 more) follow steps 5 through 7 for each number. Phonecell SX5D GSM ® Turn On/Off the Keypad Tones.
1 second. View the Speed Dial List 1) Press the MENU key. 2) Select Phonebook, then select Settings. 3) Select Speed Dial List. Phonecell SX5D GSM ® Edit or Delete and Entry. View the Speed Dial List. Technical Manual...
3) Select All Calls Time. Reset Accumulated Air Time 1) Press the MENU key. 2) Select Call Log, then select Times & Costs. 3) Select Clear Meters. Phonecell SX5D GSM ® Received Calls View Logs. View All Calls. Clear the Call Log.
2) Select Settings, then select Phone Settings. 3) Select Screen Contrast. 4) Use the arrow keys to adjust the display contrast. 5) Press OK. Phonecell SX5D GSM ® Set Alarm Time and Tone. Set Alarm to Repeat Daily. Turn Alarm On/Off.
4) Select Bar Incoming. 5) Select the desired service to bar. 6) Select On. Select Off to cancel the bar. -NEED MORE INFORMATION- Phonecell SX5D GSM ® Turn On/Off SIM PIN1. Change SIM PIN2. Bar All Incoming Calls, via the SX5D Handset.
Page 23
4) Select the desired type of network call bar to activate (see list above for descriptions of each type). 5) Select the desired service to bar. 6) Select On. -NEED MORE INFORMATION- Phonecell SX5D GSM ® Bar Incoming Calls if Abroad, via the Network. Bar All Outgoing Calls, via the Handset.
2) Select Settings, then select Dial Settings. 3) Select Dial Delay. 4) Enter the desired delay time time (in seconds). 5) Press OK. Phonecell SX5D GSM ® Bar All Calls, via the Network. Add to or Edit the Fixed Dialing List.
All system features can be reset to the factory defaults. 1) Press the MENU key. 2) Select Settings, then select Restore Defaults. 3) Select Yes to restore all factory default settings. Phonecell SX5D GSM ® Auto Dial. In-Call DTMF. Lock the Phone.
NOTE: Options are available depending on the status of the call or calls. For example, if only one other person is in the call, only the End All option will display, or if all the calls, have been joined, the Join All option will not display. Phonecell SX5D GSM ® Call Divert (Forwarding). Call Waiting.
NOTE: If you do not specify the Alert match text, or if you enter incorrect text for the Alert match, the SMS message will not display when you receive new voicemail. Phonecell SX5D GSM ® Caller ID Settings. Set Voicemail Access Numbers.
5) Enter the desired number, or press the NAME key to select a phonebook entry. 6) Press OK. 7) To send the message, select Send Now. To save it to send at a later time, select Send Later. Phonecell SX5D GSM ® Read Text Messages. Reply to Received Messages.
Page 29
1) Press the SMS key. 2) Select Message Settings. 3) Select Message Format. 4) Select the desired format in which to send messages. 5) Press OK. Phonecell SX5D GSM ® View Saved Messages. Send Saved Messages. Message Lifetime. Message Format.
Main Menu: Allows access to the Phonebook, Messages, or Call Log features. NOTE: Some options display depending on the current call status. For example, if there are no calls on hold, the Retrieve or Swap options will not display. Phonecell SX5D GSM ® Set Information Subjects. Technical Manual...
SX5D from voice to fax mode. 1) Set up a standard 19,200 bps modem. 2) Install a commercial PC fax emulator (Winfax, Netfax, etc.). Phonecell SX5D GSM ® DB-9 cable and PC serial port have 9 PIN connections...
If a rotary phone is connected to the SX5D, the Dial Settings must be set to Pulse. For push-button (DTMF) phones, do not turn the Pulse Dialing option on. 1) Press the MENU key. 2) Select Settings, then select Dial Settings. 3) Select Pulse Dialing, then select On. Phonecell SX5D GSM ® Additional phone Wireless Network...
Page 33
5) Enter up to two digits for the desired prefix. The factory default prefix is “#.” 6) Press OK. Make Calls via the Secondary Service 1) Pick up the handset. 2) Dial the prefix. 3) Dial the desired number. Phonecell SX5D GSM ® Set the LCR Default. Technical Manual...
NOTE: The SX5D must be connected to a computer, or other device that is set up for digital data, via the serial connector in order to send or receive digital faxes. Phonecell SX5D GSM ® This RJ-11 is not usable Figure 23 - Connect the SX5D for single jack mode.
(BER, FER, etc.). The signal strength will be on row 2 and the sig- nal quality value will be on row 3. Restore Service DEFAULTS: Resets all service items to factory defaults separately from the user settings. Phonecell SX5D GSM ® ® SX5D Technical Manual...
Standard. In March, 1993, the U.S. Federal Communications Commission (FCC) proposed the adoption of this updated Standard. The design of your Telular Phonecell you want to limit RF exposure even further than the updated ANSI Standard, you may choose to control the duration of your calls and operate your phone in the most power-efficient manner.
Page 37
Part 15 of the FCC rules. Changes or modifications not expressly approved by Telular Corporation will void your authority to operate the equipment per FCC part 15 paragraph 15.21. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
(15) months from date of shipment from Telular. Telular, at its option, shall at no charge either repair, replace or refund the purchase price of the Product during the warranty period, provided it is returned by Buyer in accordance with the terms of this warranty to the Telular designated repair center.
Page 39
LONG AN IMPLIED WARRANTY LASTS. VI. SOFTWARE PROVISIONS: Laws in the United States and other countries preserve for Telular certain exclusive rights for copyrighted Telular software such as the exclusive rights to reproduce in copies and distribute copies of such Telular software. Telular software may be copied into, used in and redistributed with only the Product associated with such Telular software.
The modem properties window will appear. NOTE: A data card modem device may appear in the list of installed modems. 3) Click the ADD button to install a new modem device for the Phonecell Phonecell SX5D GSM ® ® SX5.
Page 41
"Other" followed by clicking the NEXT button. If this window does not appear, go to Step 5. 5) The install new modem window will appear. Then, click on the "Don't detect my modem option" followed by clicking the NEXT button. Phonecell SX5D GSM ® Technical Manual...
Page 42
7) The install new modem will update to select the com port. Click on the available serial port and then click on the "Next" button. Windows 95 will create a modem configuration file for the ® Phonecell SX5. This may take several minutes. Phonecell SX5D GSM ® Technical Manual...
Page 43
8) The Install New Modem window will update again. Click on Finish to proceed. 9) The Modems Properties window should appear. Click on the Properties button. Phonecell SX5D GSM Technical Manual ®...
Page 44
10) The Standard 19200 bps Modem Properties window will open in the General tab. Set as shown with the com port you have selected. 11) Click on the Connection tab. Set as shown below. Phonecell SX5D GSM Technical Manual ®...
Page 45
12) Click on the Advanced button. Set as shown. 13) Click on OK and Close to back out of each window. Your modem is now set up. Phonecell SX5D GSM Technical Manual ®...