Advertisement
(i
roubleshooting guide
Symptom
Washer does not start
Washer will not spin
Door does not open
Wash cycle time
delayed
Fabric softner
overflow
Softeners dispensed
too early
Possible Cause
, Electrical power cord may not
be plugged in or connection
may be loose.
, House fuse blown, circuit
breaker tripped,or a power
outage has occurred.
, Water supply tap is not turned
on.
• Check that the door is firmly
shut.
• Too much softener may cause
an overflow.
Solution
Make sure plug fits tightly in wall
outlet.
Reset circuit breaker or replace fuse.
Do not increase fuse capacity.
If problem is a circuit overload, have
it corrected by a qualified electrician.
Turn on water supply tap.
Close the door and press the
StarVPause button. After pressing
the StarVPause button, it may take
a few moments before the clothes
washer begins to spin. The door
must lock before spin can be achieved.
Add 1 or 2 similar items to help balance
the load.
Rearrange load to allow proper spinning
Once machine has started, the door
can not be opened for safety reasons.
Check if the "Door Lock" icon is
illuminated. You can safely open the
door after the "Door Lock" icon
turns off.
The washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
Follow softener guidelines to ensure
appropriate amount is used.
Do not exceed the maximum fill line.
Close the dispenser drawer slowly.
Do not open the drawer during the
wash cycle.
2Z
Advertisement
