Download  Print this page

Audiocom SPK-2000 Specification Sheet

Telex powered loudspeaker specification sheet
Hide thumbs
   

Advertisement

The SPK-2000 is a powered loudspeaker accessory for the US-2002 User Station and the ES-4000A Expansion Station. It may
be used on a desktop, or rack mounted with optional Telex Audiocom rackmount hardware. (Unit is supplied with rubber feet for
desktop use.)
The SPK-2000 comes with a 3 ft (0.9 m) cord for connection to the US-2002 or ES-4000A speaker jack.
Features
Powerful Speaker Output
Powerful speaker output for public address or stage announcement.
Rack-Mountable
Rack-mountable with optional Telex Audiocom rackmount hardware. Occupies ½-wide rack space.
Two Line-Level Speaker Inputs
Two line-level speaker inputs, with balance control to adjust the mix. Combine two channels of intercom audio. Or, connect the
monaural mix output from a Telex Audiocom User Station, then connect a local program audio source, such as background
music.
Master Volume Control on Front Panel.
Works with the Same Power Pack as US-2002 and ES-4000A.
Line Drawing
SPK-2000
Powered Loudspeaker

Advertisement

Table of Contents
loading

  Related Manuals for Audiocom SPK-2000

No related manuals

  Summary of Contents for Audiocom SPK-2000

  • Page 1 The SPK-2000 is a powered loudspeaker accessory for the US-2002 User Station and the ES-4000A Expansion Station. It may be used on a desktop, or rack mounted with optional Telex Audiocom rackmount hardware. (Unit is supplied with rubber feet for desktop use.)
  • Page 2 SPK-2000 Specifications General Power Requirements: 12 to 15 VDC, 65 to 150 mA Frequency Response: 400 Hz to 8 kHz, ± 3 dB Input Impedance: 47K ohms, minimum Input Level: 1 VRMS, nominal Output Amplifier Power: 4.4 W maximum; 2 W continuous Signal-to-Noise: 75 dB (ref 2W into 8 ohms) Less than 0.5% at 2W...