Canon TS3300 Series Online Manual page 248

1. Roll up paper in opposite direction to paper curl as shown below.
2. Check that paper is now flat.
We recommend printing curl-corrected paper one sheet at a time.
Note
• Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward.
Follow the instructions below to curl the paper outward up to 0.1 in. / 3 mm (C) in height before printing.
This may improve the print result.
(B) Print side
We recommend feeding paper that has been curled outward one sheet at a time.
If intensity is set high, reduce intensity setting and try printing again. (Windows)
Check4
If you are printing with a high intensity setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.
Check the intensity setting in the printer driver.
Adjusting Intensity
Is platen glass dirty?
Check5
Clean the platen glass.
Cleaning Platen and Document Cover
Is paper feed roller dirty?
Check6
Clean paper feed roller.
Cleaning Paper Feed Rollers
248