Switching On and Off
For short operation, hold the control dial (3)
& rotate it anti-clockwise. Once complete,
release the dial. It will automatically return
to the "0" (OFF) position.
For longer operating times, rotate the
control dial clockwise to select the
Warning! Never run the mixer for longer
than 10 minutes to prevent over-heating.
After 10 minutes of continuous operation,
allow the mixer to cool to room temperature
Warning! After switching off always allow
the motor to stop before approaching the
Warning! All loose clothing and hair must
be kept clear of moving parts.
Warning! Always discount the unit from the
supply if it is to be left unattended and
before assembling, dissembling or cleaning.
Warning! Never raise the mixer head when
the blender, mincer, pasta maker or
shredder attachments are ﬁtted. Remove all
attachments before lifting or moving the
Warning! Never run the Mixer, the Blender
and the front attachment simultaneously -
the unit will overheat. All other
combinations will work ﬁne.
Cleaning and maintenance
Warning! Switch the appliance off and
unplug it before cleaning or maintenance.
Be careful when cleaning the blades; they
Warning! Care is needed when handling
cutting blades, especially when removing
blades and during cleaning.
Warning! Do not immerse the appliance, the
cord set or the plug in water or any other
• Wash the attachments in warm soapy
water and dry well.
• Wipe the motor unit (2) with a damp cloth.
Do not use any abrasive or solvent-based
Always clean the appliance immediately
after use. Do not let food dry on to the
blades as this will make cleaning difﬁcult.