Page 2
E xam p l e s o f i n st a ll atio ns 1 Uses The multi-switches of the GigaSwitch 9/8 series serve to provide satellite IF signals as well as terrestrial signals for up to 16 parties.
Page 3
Basic unit (for a maximum of 8 parties) Art. No. 0000/3245 Cascade matrix (for a maximum of 8 parties) Art. No. 0000/3246 Mains power adapter Art. No. 0000/3222...
2 Safety notes For your own protection, you should read the safety notes carefully before installing the equipment. The manufacturer accepts no liability for damage caused by inappropriate hand- ling, or by ignoring the safety instructions. > Components should be mounted in a dry room, on a horizontal plane, consisting or flame-resistant materials.
Page 5
Insulation should be stripped from the cable as follows: 3.4 Antenna sockets The participants should be connected to the system via antenna sockets (SV 500 or SVT 500). This ensures that terrestrial programmes can be received without the need for an additional socket, and equipment connected in this way is protected from extraneous interfe- rence.
Distribution of terrestrial programmes: > Ensure that the terrestrial signals fed into the system are of approximately equal strength. > A terrestrial pre-amplifer is not required. 5 Troubleshooting guide Problem No reception on any pola- risation plane. Still no reception on any polarisation plane No reception, or wrong programmes, on individual...
6 Technical Data Terrestrial 47 - 862 MHz, Satellite band: 950 - 2150 MHz Throughput damping Branch gain on 9/8K Branch gain on 9/8G Decoupling receiver outputs Input levels recommended maximum Shielding Control Mains adapter Power, requirements of mains adapter max.
Page 8
Your equipment is in accordance with CE, and complies with all relevant EU standards! Subject to change, not responsible for printing errors. Correct as at 02/04 TechniSat and GigaSwitch are registered trademarks of TechniSat Digital GmbH P.O.Box 560 D- 54541 Daun, Germany 190204 www.technisat.de...
Need help?
Do you have a question about the GigaSwitch 9/8 and is the answer not in the manual?
Questions and answers