Technics SA-DA10 Operating Instructions Manual page 31

3 2,4
2
FM MODE, EON
A
2
MEMORY
PTY SEARCH
3
TUNING
PTY SELECTOR
4
MEMORY
SPEAKERS
A
PTY SEARCH
TUNED STEREO
SPEAKERS
A
B
PRESET
1 1 1
DISPLAY MODE
2 2 2
TUNING
PTY SELECTOR
EO
1
M
M
MHz
MHz
The radio
A
Manual memory presetting
The desired stations can be preset into the desired channels by the user.
1
Set to the desired frequency.
(a Pages 28 and 29.)
If interference or static is keeping you from enjoying an FM
broadcast, press [FM MODE, EON] (for the United Kingdom) or [FM
MODE] (for Australia and New Zealand) and change to monaural.
You can preset the station in monaural just as in stereo.
2
Press [MEMORY, PTY SEARCH] (for the
United Kingdom) or [MEMORY] (for
Australia and New Zealand).
To cancel the memory function, press [MEMORY, PTY SEARCH]
(for the United Kingdom) or [MEMORY] (for Australia and New
Zealand) again.
3
Press [TUNING ,
(for the United Kingdom) or [TUNING ,
] (for Australia and New Zealand) to
select the desired channel.
Holding the buttons down lets you scroll through channels faster.
4
Press [MEMORY, PTY SEARCH] (for the
United Kingdom) or [MEMORY] (for
Australia and New Zealand).
The channel will blink on the display.
To continue presetting
Repeat steps 1 through 4.
B
To listen to preset channels
1 1
Press [PRESET, DISPLAY MODE] (for the
United Kingdom) or [PRESET] (for
Australia and New Zealand).
2 2
Press [TUNING ,
(for the United Kingdom) or [TUNING ,
] (for Australia and New Zealand).
Holding down the buttons lets you scroll through channels faster.
The channel number flashes for approximately 5 seconds.
Select the desired channel number during that time.
After 5 seconds, the display will change from the channel number
to the frequency.
Note
If you press [PRESET, DISPLAY MODE] (for the United Kingdom)
or [PRESET] (for Australia and New Zealand) while the channel
number is displayed, the display will change to the frequency.
To confirm the channel number of the station being received
Press [PRESET, DISPLAY MODE] (for the United Kingdom) or [PRESET]
(for Australia and New Zealand).
(The channel number flashes for approximately 5 second.)
Note
The channel number is not displayed if you change the frequency or FM
mode setting.
For your reference
Even if the AC mains lead is disconnected from the household AC outlet,
the memory will retain its contents for approximately one month.
If frequency presettings are accidentally erased
Program the presettings once again.
The AC mains lead should remain connected for one hour or more
for the memory back-up to be effective.
, , PTY SELECTOR]
,
, , PTY SELECTOR]
,
31
RQT5518