Parameter setting
Set the parameters using the engineering tool and the setting tool.
Setting of engineering tool
■Setting of control module
Connect the engineering tool to the CPU module, and set the parameters.
1.
Set the CPU module.
[Project] [New]
2.
Click the [Setting Change] button and set "Use Module Label" to "Yes".
3.
Click the [OK] button, then, the module label of the CPU module is added.
4.
Set the control module.
[Navigation window] [Parameter] [Module Information] Right-click [Add New Module]
7 COMMUNICATION EXAMPLE
38
7.1 Communication Example Between Control Module and Sensor Head