PICTURE menu
Remote control
See "Navigating through the MENU" on page 30.
See "Main menu and sub-menu" on page 28.
PICTURE MODE
Depending on the projection environment, you can use
these preset parameter settings to optimise image
projection. Press I H to cycle through the options.
NORMAL
DYNAMIC
COLOUR1
COLOUR2
Setting for a general image, such
NORMAL
as sports or games
DYNAMIC
Bright and sharp setting
Setting for HDTV standard in ITU-
R BT. 709 and colour temperature
COLOUR1
6 500 K at the default setting of
the PICTURE menu items.
Setting for DCDM standard
(SMPTE431-2) and colour
COLOUR2
temperature 6 300 K at the
default setting of the PICTURE
menu items.
CINEMA1
Hollywood style colours
Deeper and more rich colour
CINEMA2
setting
CINEMA3
Vivid and crisp colour setting
NOTE:
• It may take for a while until the selected mode is
stabilised.
Control panel
CINEMA3
CINEMA2
CINEMA1
CONTRAST
You can adjust the contrast of the projected image.
Adjust the BRIGHTNESS in advance if necessary.
Lower
Setting range: -64 to +64
BRIGHTNESS
You can adjust the brightness of the projected image.
Darker
Setting range: -32 to +32
COLOUR
You can adjust the colour saturation of the projected
image.
Lighter
Setting range: -32 to +32
When COMPUTER signal is connected, only available
with the following signals.
1 125 (1 080)/60i
1 125 (1 080)/60p
TINT
You can adjust the skin tone in the projected image.
More
reddish
Setting range: -32 to +32
When COMPUTER signal is connected, only available
with the following signals.
1 125 (1 080)/60i
1 125 (1 080)/60p
SHARPNESS
You can adjust the sharpness of the projected image.
Less
sharp
Setting range will vary according to the selected input
signal.
Higher
Brighter
Darker
1 125 (1 080)/50i
1 125 (1 080)/50p
More
greenish
1 125 (1 080)/50i
1 125 (1 080)/50p
More
sharp
E
NGLISH - 31