Download Print this page

SilverBack B2315W Owner's Manual

Basketball system

Advertisement

Quick Links

O W N E R ' S M A N U A L
1. Read this manual carefully before starting assembly. Read each step completely before beginning
each step.
2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons
before assembling or ordering parts.
3. To make assembly of your basketball system easier, use the Hardware Identifier on page 3 to
identify and sort all fasteners. Check all cartons for kits. All hardware is not located in one kit.
4. Do not tighten hardware until instructed to do so. If hardware is tightened too soon, mounting holes
may not align and parts may not easily fit together. Leave locknuts slightly loose until you are instructed to
tighten them.
Please Do Not Return This Product To The Store!
Contact Escalade
Phone:
1-888-USA-GOAL
Fax:
1-866-873-3536
E-mail:
basketball@escaladesports.com
Mailing Address (correspondence only):
Escalade Sports
PO Box 889
Evansville, IN 47706
Please visit our World Wide Web site at:
ON-LINE TROUBLE SHOOTING
ON-LINE PARTS REQUESTS
ADDITIONAL ESCALADE
Escalade
®
Sports products may be manufactured and/or licensed under the following patents:
6419596, 6179733, 5919102, 5071120, 4798381, 4424968, D326128
Additional patents may be pending. One or more of the listed patents and/or pending patents may cover specific product.
®
Sports customer service department at:
®
SPORTS PRODUCT INFORMATION
Toll – Free!
Toll – Free!
www.escaladesports.com
TECHNICAL ASSISTANCE
FREQUENTLY ASKED QUESTIONS
MODEL NO.
B2
B2
315W
315W
B2 315W
315W
B2
B2
315W
Silverback
BASKETBALL SYSTEM
2L-7092-00
©2006 Escalade
®
Sports

Advertisement

loading
Need help?

Need help?

Do you have a question about the B2315W and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SilverBack B2315W

  • Page 1 315W 315W B2 315W 315W 315W Silverback BASKETBALL SYSTEM O W N E R ' S M A N U A L 1. Read this manual carefully before starting assembly. Read each step completely before beginning each step. 2. Some smaller parts may be shipped inside larger parts. Check inside all parts and cartons before assembling or ordering parts.
  • Page 2: Safety Instructions

    SAFETY INSTRUCTIONS FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE. Owner must ensure that all players know and follow these rules for safe operation of the system. • Do not dunk on this unit • During play, use extreme caution to keep players face away •...
  • Page 3 (16 Pieces) / 1 2” -13 x 1” Hex Bolt (2 Pieces) (10 Pieces) (1 Piece) 3/8”-16 X 1-3/4” 3/8”-16 X 1” #10 X 1 1/8” Flat Head Bolt 1/2” Split (4 Pieces) Lock Washer (6 Pieces) (2 Pieces)
  • Page 4 Vertical main post assembly is a two part process. PART 1 PART 2 Day 1. Complete Anchor System Installation Instructions. Day 5. Complete Silverback ® assembly instructions. (Requires (Below) four adults) Day 2-4. Allow concrete to cure. ANCHOR SYSTEM INSTALLATION INSTRUCTIONS (Day 1) Figure 1 16”...
  • Page 5 SILVERBACK ASSEMBLY INSTRUCTIONS (Day 5) IMPORTANT! Nylon washers (#5) adequately space painted parts at all pivot points. Neglecting the use of these washers will result in rusted parts. Figure 3 NOTE: All board arms are made of rectangular tubing. Tightening hardware too tight may damage tubing and make adjustment of system difficult.
  • Page 6 Figure 5 Attach lower arms (#11) to Top Pole (#3), as shown in Figure 5, using a hex bolt (#22), two flatwashers (#18), two plastic washers (#5) and lock nut (#4). Note: make sure lettering is right side up. Do NOT tighten bolt (#22) at this time.
  • Page 7 13. Locate hardware needed to mount pole to anchor bolts. You will need, eight flatwashers (#37), four lock washers (#36), four hex nuts (#35) and four thread protectors (#34). PLACING THE POST ON THE ANCHOR SYSTEM REQUIRES AT LEAST FOUR CAPABLE ADULTS. 14.
  • Page 8 Figure 11 19. Mount Goal Assembly (#28) and Rim Pad (#27) to Backboard, as shown in Figure 11, using four bolts (#49), four washers (#26), and four locknuts (#4). Tighten fasteners finger tight, leave them loose enough to level rim. 20.
  • Page 9: Care Information

    POST PAD INSTALLATION INSTRUCTIONS Secure Post Pad (#48) to front of pole by wrapping straps around pole and sticking to velcro on opposite side of Pad. Top Post Pad strap should be above Post Ears. See Figure 13. Figure 13 CARE INFORMATION - BACKBOARD - Items needed to clean backboard:...
  • Page 10: Limited 5 Year Warranty

    LIMITED 5 YEAR WARRANTY This consumer warranty extends to the original consumer purchase of any Escalade ® Sports Product (hereinafter referred to as the “Product”). WARRANTY COVERAGE: Escalade ® Sports warrants to the original Consumer Purchaser that any Product of its manufacture is free from defects in material and workmanship.
  • Page 11 8S-6657-01 Stop Spacer 34 3M-6469-00 5/8 Thread Protector 1A-6331-01 Lower Board Arm 2B-6097-00 5/8-11 Hex Nut 4L-7945-00 Silverback Board Arm Decal 36 2B-6099-00 5/8 Split Lockwasher 3M-6467-00 Actuator Cap 37 2B-6098-01 5/8 SAE Flat Washer 8S-6658-00 Pivot Tube 38 2S-6453-00...
  • Page 12 2L-7092-00...