Care And Cleaning; Troubleshooting - Zanussi ZEI3921 User Manual

Hide thumbs Also See for ZEI3921:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
at the lowest temperatures and do not brown
food too much.

Care and cleaning

Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Before any maintenance or
cleaning can be carried out, you must
disconnect the hob from the electricity supply.
The hob is best cleaned while it is still
warm, as spillage can be removed more
easily than if it is left to cool.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the appliance with
steam blasters or high-pressure cleaners.
Scratches or dark stains have no effect on
how the appliance operates.
Removing the dirt:
1. Use the fine scouring powder or a scouring
pad to remove the dirt.

Troubleshooting

Problem
The appliance does not operate.
The plate does not heat up.
Results of plate are not satisfacto-
ry.
Acoustic warning (double acoustic
signal) sounds.
www.zanussi.com
2. Clean the appliance with a damp cloth and
3. Heat the hotplate to a low temperature and
4. To maintain the hotplates, wipe the plates
Important! For stainless steel edges of the
hob use cleaner for stainless steel.
thermal load.
The stainless steel can become tarnished if it is
too much heated. Refer to this you must not
cook with potstones, earthenware pans or cast
iron plates. Do not use aluminium foil to prevent
damage the top during operation.
Possible cause and remedy
• Examine the fuse in the electrical system of the house in the fuse box.
If the fuses blow time after time, speak to an authorised electrician.
• Make sure that you plug in the appliance and switch the electrical
supply.
• Make sure that you turn correct control knob.
• Examine the fuse in the electrical system of the house in the fuse box.
If the fuses blow time after time, speak to an authorised electrician.
• Make sure that plate is clean and dry.
• Make sure that the cooking pan is the correct size for the plate.
• Make sure that cooking pan has a flat bottom.
• Make sure that the setting is correct for type of cooking.
• The pot is not suitable. Use suitable cookware.
• No cookware on the plate. Place cookware on the plate.
• The diameter of the bottom of the cookware is too small for the plate.
• Move onto a smaller plate. Use suitable cookware.
some detergent.
leave to dry.
with a drop of olive oil on a kitchen towel to
prevent rust.
The stainless steel edge of the plate can
be slightly discoloured as a result of the
17

Advertisement

Table of Contents
loading

Table of Contents