McIntosh PC-4 Owner's Manual

McIntosh PC-4 Owner's Manual

Power control

Advertisement

Quick Links

OWNER’S
MANUAL
PC-4 Power Control
PC-4
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PC-4 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for McIntosh PC-4

  • Page 1 OWNER’S MANUAL PC-4 Power Control PC-4 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 FAX: 607-724-0549...
  • Page 2: Table Of Contents

    Phone: 888-979-3737 Fax: 310-217-9288 Customer Service If it is determined that your McIntosh product is in need of repair, you can return it to your dealer. You can also return it to the McIntosh Laboratory Service Repair department. For assistance on factory repair return procedure, contact the McIntosh Repair Department at: McIntosh Laboratory, Inc.
  • Page 3: Safety Instructions

    Safety Instructions IMPORTANT SAFETY INSTRUCTIONS! Installation: 7. Locate the equipment away from heat sources such as PLEASE READ THEM BEFORE radiators, heat registers, stoves, or other appliance that OPERATING THIS EQUIPMENT. produce heat. 8. Mount the equipment in a wall or cabinet only as de- scribed in this owner’s manual WARNING SHOCK HAZARD - 9.
  • Page 4: Introduction

    Allow approximately 0.25 inches of the screw to ex- McIntosh or have the same characteristics as the origi- tend out in order to allow the PC-4 back panel slots to fit nal part. Unauthorized substitutions may result in fire, over the screw heads.
  • Page 5 LED that indicates when the switched outlets are on SWITCHED outlets for system accessory com- ponents UNSWITCHED outlet remains on as long as the PC-4 power cord is plugged into a live AC outlet LINE OUT connection for LINE IN connection for telephone...
  • Page 6: How To Connect

    How to Connect How to Connect 4. Connect a Power Control cable from a McIntosh 1. Connect the PC-4 Power Cord to a live AC outlet that is capable of supplying 15 amperes at 100-120 volts. Preamplifier, Control Center, Integrated Amplifier or 2.
  • Page 7: Specifications

    AC power at all times such as a tosh component. When the component turns on, a control McIntosh Preamplifier, Integrated Amplifier, Control Cen- signal is sent to the PC-4 that will turn on the Switched ter or Multizone System Controller. AC outlets.
  • Page 8 McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, NY 13903 McIntosh Part No. 040622...

Table of Contents