Download  Print this page

Teac Esoteric G-0s Owner's Manual

Master clock generator
Hide thumbs

Advertisement

G - 0s
Master Clock Generator
Owner's Manual

Advertisement

Table of Contents
loading

  Related Manuals for Teac Esoteric G-0s

No related manuals

  Summary of Contents for Teac Esoteric G-0s

  • Page 1 G - 0s Master Clock Generator Owner’s Manual...
  • Page 2: Important Safety Instructions

    EXPOSE THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. < USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
  • Page 3: Table Of Contents

    Contents Thank you for choosing TEAC. Read this manual carefully to get the best performance from this unit. IMPORTANT SAFETY INSTRUCTIONS ..... 2 Before Use .
  • Page 4: Features

    CD players to process both the video and audio signals at the same time. The G-0s comes with a 100 kHz clock output intended for universal players (in PAL FILM mode, the output is switched to 96 kHz). If your universal players are 100 kHz-capable, you can control them by this high-precision clock.
  • Page 5: Names Of Each Control

    UNIVERSAL CLOCK OUT button Use this to switch the Universal Clock output on or off. Universal Clock is the TEAC-ESOTERIC original clock for universal players. When the FREQUENCY MODE is set to 44.1kHz or 48kHz, the frequency of the universal clock is set to 100kHz. When the FREQUENCY MODE is set to PAL FILM, the frequency of the universal clock is set to 96kHz.
  • Page 6: Connections

    Connections CAUTION: < Switch off the power to all equipment before making connections. < Read the instructions of each component you intend to use with this unit. < Be sure to insert each plug securely. To prevent hum and noise, avoid bundling the signal interconnection cables together with the AC power cord or speaker cables.
  • Page 7 < Each of the A, B, and C channels is switch-selectable between 1xFs, 2xFs, and 4xFs. So you can, for example, connect an 88.2 kHz and a 176.4 kHz machine to the single G-0s and synchronize them. Three buttons (A, B, and C) are provided on the front panel for each channel.
  • Page 8: Set Up For Esoteric Units

    This is the recommended set up for synchronization with TEAC-ESOTERIC CD units: P-70, X-01, UX-1, P-01, D-01 Connect WORD CLOCK OUT terminals to WORD SYNC IN terminals of each unit using commercially available BNC coaxial cables. P-70: turn ON the WORD SYNC IN switch (front panel), then set the PLL filter switch (back panel) to ‘MODE2’.
  • Page 9: Set Up For Dvd Player, Universal Player, Etc

    Set Up for DVD Players, Universal Players, etc. This is the recommended set up for synchronizing DVD players, D/A converters and other similar digital devices. Connect WORD CLOCK OUT terminals to word synchronization input terminals of your units, using commercially available BNC coaxial cables. If your unit can be synchronized with the universal clock signal (ex.
  • Page 10: Dimmer

    Troubleshooting In case you experience any problem with this unit, please take the time to look through this chart and see if you can solve the problem yourself before you call your dealer or a TEAC service center. No power e Check the connection to the AC power supply.
  • Page 11: Specifications

    ........10 minutes If the G-0s is in standby mode and the Rubidium oscillator is stabilized.
  • Page 12 7733 Telegraph Road, Montebello, California 90640 Phone: (323) 726-0303 TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008 TEAC MEXICO, S.A. De C.V Campesinos N°184, Colonia Granjas Esmeralda, Delegacion Iztapalapa, CP 09810, México DF Phone: (525) 581-5500 TEAC UK LIMITED 5 Marlin House, Croxley Business Park, Watford, Hertfordshire, WD18 8TE, U.K.