Download Print this page

TDK ZACT-ME Series Specification Sheet

Emc filters for ac power line for triple-phase, large-size box cased zact-me series

Advertisement

Quick Links

EMC Filters for AC Power Line
For Triple-phase, Large-size Box Cased ZACT-ME Series
FEATURES
• While reducing the filter size, the highly efficient thermal design
allows the handling of large currents with high attenuation.
• They are highly effective at preventing both the radiation and
penetration of EMC noise. The parts are, therefore, highly
immune to externally generated noise and do not, themselves,
serve as sources of radiated noise
• For the frequency band set by CISPR, attenuation is shown for
both differential mode and common mode noise components.
• Can withstand voltages of AC.1250V between the lines, and AC.
2000V between the line to ground.
• It is a product conforming to RoHS directive.
APPLICATIONS
Computers, HDDs, electronic exchange devices, NC control
devices, inverters for motor, etc.
SHAPES AND DIMENSIONS
J
C
Part No.
A
ZACT2230-ME
120
• Case: metal, terminal: stud
ELECTRICAL CHARACTERISTICS
Part No.
Rated voltage Eac(V)
Rated current(A)
Test voltage Eac(V)[Between terminal and case]
Insulation resistance(MΩ)
[DC. 500V, 1min/between terminal and case]
Leakage current(mA)[250V • 60Hz]
DC resistance(mΩ)
Operating temperature range(°C)[Including self-temperature rise]
With derating over(°C)
Temperature rise(°C)
Attenuation frequency range
(MHz)[+5 to +35°C]
Weight(kg)
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
• All specifications are subject to change without notice.
K
R
1
S
1
T
1
B
F
D
B
C
D
200
115
260
ZACT2230-ME
250
30
2000
100min.
1max.
40max.
–25 to +85
45
35max.
Differential mode at 40dB
0.15 to 10
Common mode at 40dB
0.15 to 10
5
SAFETY STANDARDS
Standard and standard No.
U.S.A.
Part No.
UL
UL1283
ZACT2230-ME
øH
R
2
S
2
T
2
E
F
øG
100
220
M6
Conformity to RoHS Directive
Canada
Europe
CSA
NEMKO
CSA C22.2 No.8
EN60939
LR76849C
P08208997
Dimensions in mm
H
I
J
5.5
64
66
005-01 / 20090226 / e9111_zact_me.fm
(1/2)
K
240

Advertisement

loading

Summary of Contents for TDK ZACT-ME Series

  • Page 1 EMC Filters for AC Power Line For Triple-phase, Large-size Box Cased ZACT-ME Series FEATURES • While reducing the filter size, the highly efficient thermal design allows the handling of large currents with high attenuation. • They are highly effective at preventing both the radiation and penetration of EMC noise.
  • Page 2 TYPICAL ELECTRICAL CHARACTERISTICS ATTENUATION vs. FREQUENCY CHARACTERISTICS ZACT2230-ME Frequency ( MHz ) CIRCUIT DIAGRAM R: Bleeder resistor CAUTIONS • When there is a danger of a high energy pulse voltage (over 2kV for over 1µs), use a surge absorbing element such as a varistor, or arrestor on the EMC filter power supply input side.

This manual is also suitable for:

Zact2230-me