Connecting to an Aerial or Cable Television Network
Rear of the TV
All manuals and user guides at all-guides.com
To view television channels correctly, a signal must be received by
the set from one of the following sources:
In the first three cases, connect the aerial or network input cable to
the 75Ω coaxial socket on the rear of the television.
If you are using an indoor aerial, you may need to turn it when
tuning your television until you obtain a picture that is both sharp
For further details, refer to:
An outdoor aerial
A cable television network
A satellite network
"Storing Channels Automatically" on page 20.
"Storing Channels Manually" on page 22.