Network Management Quick Reference - Honeywell 6808 Installation And Operation Manual

Network Management
4. Select which panel to source the options from.

6.4 Network Management Quick Reference

Menu
Learn
Network
Edit Network
Names
Edit Panel ID
Computer
Access
Network
Programing
Access Codes
72
Figure 6.2 Sync Network Options
Options/Defaults
Add or remove
Guest or member panels into the
network
Panel Names Network Panel ID
Site Names Edit Site Member
Change current
panel ID
Computer Access
*123456
Number
Computer Code *0
Edit Name
Edit Access Code
Select Profile
(01 - 20)
Panel Functions
With Line selected
Line 1 scrolls to show the date
.
Scroll down to show checksum
See Section 6.2.1
Edit Panel Names
See Section 6.2.2
Edit Site Names
See Section 6.2.3
See Section 6.2.4
System Reset
System Silence
System ACK
Fire Drill Key
Profile 1 is the profile that
System Tests
dictates what functions the
Fire Drill
Firefighter Key has access to.
Because this is the profile for a
Indicator Test
keys, the user name and the
Walk Test-No Report
access code can not be edited
Walk Test-With Report
for this profile.
Communicator Test
Profile 2 is the profile for the
Clear History Buffer
installer and is referred to as the
Point Functions
"Installer Code". This profile's
Disable/Enable Buffer
user name and panel functions
can not be edited.
Point Status
See Section 6.2.5.
Set SLC Device
Address
SLC Single Device
Locator
SLC Multi-Device
Locator
I/O Point Control
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017
Comments