Before You Begin Installing
•
High frequency noise, such as that produced by the inductive reactance of a speaker or bell, can also be reduced by running the wire
through ferrite shield beads or by wrapping it around a ferrite toroid.
18
AC Power
Input
SLC IN/OUT
1/4" spacing must be
maintained between each
of these circuit types; as well
as between power limited
and non-power limited circuits.
Figure 3.1 Wire Routing Example
6808 Manual — P/N LS10146-001SK-E:C 09/28/2017
NAC/Aux Power
Outputs
Relay Outputs
SBUS Devices
Phone Lines