Electrolux EIV9467 User Manual page 12

12 www.electrolux.com
When the time comes to an end, a signal
sounds and 00 flashes. Touch
the signal.
To deactivate the function: touch
indicators
to set 00 on the display.
The function has no effect
on the operation of the
cooking zones.
5.8 Pause
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, all other
symbols on the control panels are
locked.
When the function is active,
symbols can be used.
The function does not stop the timer
functions.
Touch
The symbol turns red. The heat setting is
lowered to 1.
To deactivate the function, touch
symbol turns white. The previous heat
setting comes on.
5.9 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting.
Set the heat setting first.
Touch
The symbol turns red and blinks.
To deactivate the function, touch
symbol turns white
When you deactivate the
hob, you also deactivate this
function.
5.10 Child Safety Device
This function prevents an accidental
operation of the hob.
and light up. Use
to activate the function.
to activate the function.
Activate the hob first and do not set the
heat setting.
to stop
Touch
function.
. The
The control bar disappears.
or
To activate the function for only one
cooking time: Activate the hob with
comes on. Touch
white. The control bar appears. Set the
heat setting within 50 seconds. You can
operate the hob. When you deactivate
the hob with
To deactivate the function completely,
activate the hob and do not set the heat
setting. Touch
control bar appears. Deactivate the hob.
5.11
and
This function allows you to adjust the
temperature by moving the cookware to
a different position on the induction
cooking surface.
This function automatically divides all
cooking zones into three areas with
different heat settings. The hob detects
the position of the cookware and adjusts
. The
the pre-set power level accordingly.
• The zone indicator shows both zones
in a bridge even if only one of the
zones is used.
• You may adjust the heat setting
manually only if at least one of the
zones is activated automatically.
• You can change the heat settings for
each position separately. When you
deactivate the hob, it remembers your
heat settings and applies it next time
you activate the function.
• If you want to change the heat setting,
. The
lift up the cookware and place it on a
different zone. Sliding the cookware
can cause scratches and
discolouration of the surface.
1. Touch
The symbol turns red and the slider
displays the pre-set power level. All
cooking zones operate for 9 minutes.
2. Touch the slider and choose the
appropriate heat setting to adjust the
power level.
until it turns red to activate the
until it turns
the function is still active.
until it turns white. The
PowerSlide
to activate the function.
.