Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Tasco 119203C
Summary of Contents for Tasco 119203C
-
Page 1: Instruction Manual
Digital Trail Camera Instruction Manual Model#: 119203C LIT #: 98-1164/03-10... - Page 2 “game cams”, the Tasco Trail Cam will end your search. With one of the most user friendly interfaces in the industry, this trail camera is easy to setup and use. The extra-wide strap ensures a secure mount to the tree, and a padlock loophole keeps out would-be thieves.
- Page 3 QUICK GUIDE: TASCO TRAIL CAMERA 1. Open the camera by releasing the latches on the right side of the camera. Install 4 “D” cell batteries (flat base of all batteries contacting springs), and insert an SD card (not included, use any capacity up to 2GB) in the slot to the right of the 5 buttons (upside down, brand name facing you).
- Page 4 Lens F/3.5, effective focal length 42mm. Sight range: 45 degrees Flash High power electronic Xenon Flash. Range: 30 ft. PIR Sensor Low noise, high sensitivity passive infrared sensor. Range: 30 ft. Motion LED Indicator Display Monochrome LCD. Auto-off: 3 min. 2-digit event and image display. File Format Standard JPEG format (.jpg) still photos.
- Page 5 Setup—Using the display menu and buttons to set the date/time, and still photo or movies option. Trigger Speed—Time delay between a subject passing in front of PIR sensor and the image capture of that subject. All Tasco Trail Cameras have a trigger speed of less than one second.
-
Page 6: Parts Guide
Front of Camera Flash Camera Lens PIR Detected (or Low Battery) LED Control Panel Inside Front Display Lock SD Card Slot Button & Display Setup, Menu & Power Buttons Parts Guide Detail... - Page 7 1. Open the Cam by pulling out on the two latches on the right side. Install 4 “D” cell batteries (flat base of all batteries contacting springs), and insert an SD card (not included, use any capacity from 16MB to 8GB. Do not substitute MMC cards.) in the slot to the right of the 5 buttons as indicated on the slot cover (upside down, with the notched corner of the card on the left and metal contacts of the card facing the back of the slot).
- Page 8 Setup Guide (cont.) resolution images of better quality but fewer images can be stored to the card. In Movie mode a 14 second AVI file will be recorded to the SD Card each time the camera is triggered. 4. Pressing ENTER again after the resolution options will go to the Format screen next. Formatting is recommended before you re-use an old SD card, and is a quick way to erase all of the photos/videos after you’ve saved any you wish to keep.
- Page 9 Setup Guide (cont.) by “SnAP”, then “SLP” (Sleep). Note: for movie clips, the display will stay on “SnAP” for the 14 sec duration of each movie. 7. Thread the strap through the slots on the back of the Cam and attach the buckles, then strap it onto a suitable tree, making sure the strap is tight and the camera is aimed at the area you wish to observe.
-
Page 10: Additional Notes
The moon phase icon will appear on your photos in the lower left, next to the Tasco logo. Some hunters will find this to be a useful reference, as it can help determine if particular animals are inactive at night when a full or nearly full moon is present, causing them to be more visible to predators. -
Page 11: One-Year Limited Warranty
ONE YEAR LIMITED WARRANTY Congratulations on the purchase of your new Tasco product. You have chosen one of the finest values available today. This product carries Tasco’s ONE YEAR LIMITED WARRANTY. This product is warranted against original defects in material and/or... - Page 12 For further questions or additional information please contact: Tasco 9200 Cody, Overland Park, Kansas 66214 (800) 423-3537 • www.tasco.com ©2010 B.O.P.
Need help?
Do you have a question about the 119203C and is the answer not in the manual?
Questions and answers