Table of Contents
Advertisement
GETTING STARTED
BATTERIES
Batteries are supplied with this product:
Main unit
3 x UM-3 (AA) 1.5V batteries
Remote unit
2 x UM-4 (AAA) 1.5V batteries
Insert batteries before first use, matching the polarity
(+ and -) as shown in the battery compartment. For best
results, install batteries in the remote sensor before the
main unit. Press RESET after each battery change.
NOTE
Do not use rechargeable batteries.
shows
when batteries are low.
NOTE
It is recommended that you use alkaline batteries
with this product for longer performance.
BAR623P_EN_R2.p65
Installing the batteries:
6
6
UNIT
LOCATION
Main
Indoor Temperature Area
Remote
Outdoor Temperature Area
7/27/04, 12:40 AM
Advertisement
Table of Contents
