– Hold an appropriate collecting vessel
under the discharge tube opening.
– Pull the piston up slowly and evenly to
the upper stop to draw reagent into the
glass cylinder.
– Push the piston down gently and evenly
to dispens the reagent into the vessel.
Attention!
After use, always leave the piston in the
down position.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
– Geeignetes Auffanggefäß unter die
Öffnung der Dosierkanüle halten.
– Kolben langsam und gleichmäßig bis zum
Anschlag hochziehen. Das Reagenz wird
in den Glaszylinder gezogen.
– Kolben langsam und gleichmäßig nieder-
drücken. Das Reagenz wird in das Gefäß
dosiert.
Achtung!
Nach Gebrauch Kolben stets nieder-
gedrückt lassen.
– 17 –
Need help?
Do you have a question about the PROLINE Prospenser and is the answer not in the manual?
Questions and answers