Troubleshooting - Philips 32BDL3110Q User Manual

Table of Contents

Advertisement

8.2.

Troubleshooting

Symptom
No picture is displayed
Interference displayed on the display or audible
noise is heard
Color is abnormal
Picture is distorted with abnormal patterns
Display image doesn't fill up the full size of the
screen
Can hear sound, but no picture
Can see picture but no sound is heard
Some picture elements do not light up
After-Images can still be seen on the display
after the display is powered off. (Examples
of still pictures include logos, video games,
computer images, and images displayed in 4:3
normal mode)
Possible Cause
1. The power cord is disconnected.
2. The main power switch on the back of the
display is not switched on.
3. The selected input has no connection.
4. The display is in standby mode.
Caused by surrounding electrical appliances or
fluorescent lights.
The signal cable is not connected properly.
1. The signal cable is not connected properly.
2. The input signal is beyond the capabilities of
the display.
1. The zoom mode is not set correctly.
2. Scan Mode may be set incorrectly to
underscan.
3. If the image exceeds the screen size, Scan
Mode may need to be set to Underscan.
Improperly connected source signal cable.
1. Improperly connected source signal cable.
2. Volume is turned all the way down.
3. {Mute} is turned on.
4. No external speaker connected.
Some pixels of the display may not turn on.
A still picture is displayed for an over extended
period of time
25
Remedy
1. Plug in the power cord.
2. Make sure the power switch is switched on.
3. Connect a signal connection to the display.
Move the display to another location to see is the
interference is reduced.
Make sure that the signal cable is attached firmly
to the back of the display.
1. Make sure that the signal cable is attached
firmly.
2. Check the video signal source to see if it
is beyond the range of the display. Please
verify its specifications with this display's
specification section.
Use the Zoom mode or Custom zoom function
in the Screen menu to fine tune display geometry
and time frequency parameter.
Make sure that both video inputs and sound
inputs are correctly connected.
1. Make sure that both video inputs and sound
inputs are correctly connected.
2. Press [
] or [
] button to hear sound.
3. Switch MUTE off by using the [
4. Connect external speakers and adjust the
volume to a suitable level.
This display is manufactured using an extremely
high level of precision technology: however,
sometimes some pixels of the display may not
display. This is not a malfunction.
Do not allow a still image to be displayed for
an extended period of time as this can cause a
permanent after-image to remain on the display.
] button.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

55bdl3110q43bdl3110q50bdl3110q65bdl3110q

Table of Contents