Disposal; Disposal Of The Appliance; Disposal Of Batteries - Silvercrest SABD 3.6 Li B1 Operating Instructions Manual

Rechargeable floor sweeper
Hide thumbs Also See for SABD 3.6 Li B1:
Table of Contents

Advertisement

Available languages

Available languages

Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IAN 114179
Hotline availability:
Monday to Friday 08:00 - 20:00 (CET)

Disposal

The appliance and the batteries must be disposed
of separately.

Disposal of the appliance

Under no circumstances should
the appliance be disposed of
in standard household waste.
This product is subject to
the provisions of European
Directive 2012/19/EU.
Dispose of the appliance via an approved waste
disposal company or your municipal waste dis-
posal facility. Please observe applicable regulations.
Please contact your waste disposal centre if you are
in any doubt.
SABD 3.6 Li B1

Disposal of batteries

Used batteries may not be disposed
of in the household waste. Consumers
are required by law to dispose of bat-
teries at a collection point provided
by their local community or at a retail
store.
The purpose of this obligation is to ensure that bat-
teries are disposed of in an environmentally sound
manner. Only dispose of batteries when they are
fully discharged.
To dispose of the appliance in an environmentally
friendly way, you must remove the battery from the
appliance:
DANGER – ELECTRIC SHOCK!
Disconnect the appliance from the mains
power supply when you remove the battery!!
ATTENTION! MATERIAL DAMAGE!
Remove the battery from the appliance only if
you want to scrap/dispose of the appliance!
The appliance is permanently defective after
you have removed the battery!
1) Remove the dirt collector
2) Turn the cordless sweeper around and hold it
so that the flat side with the rotary brush
facing you.
3) Remove the rotary brush
Chapter "Cleaning and Care".
4) Use a flat object such as a screwdriver to lever
out the two small external rollers. Unscrew the
screws beneath.
5) Unscrew the 2 Phillips screws from the black
plastic cover and then remove it.
6) Unscrew the remaining 3 Phillips screws from
the plastic part beneath and then remove it.
You can now see the drive belt.
7) Remove the drive belt at the side and pull the
drive gear upwards out of the rail.
GB
.
is
as described in
15

Advertisement

Chapters

Table of Contents
loading

Table of Contents